tschak909 Posted September 25, 2018 Author Share Posted September 25, 2018 Yup, I explicitly filter out any double IAC sequences in protocol.c/h This code is working in the Spectranet version, which uses a similar approach to the TIPI. I'll be circling back around to this, shortly, as I am tidying up the MS-DOS versions. -Thom Quote Link to comment Share on other sites More sharing options...
tschak909 Posted October 14, 2018 Author Share Posted October 14, 2018 Ok, so I've done another test build, finding an interesting glitch in the Apple IIgs version that exhibited the same symptoms, which I fixed by altering the echo packet test condition slightly. Let's see if this helps? Can somebody with a TIPI test, please? -Thom PLATO-tipi-20181014.DSK Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted October 14, 2018 Share Posted October 14, 2018 Not knowing how PLATOTERM works. I ran two files using E/A option 5... Nice Big TI logo... TIPI light stays on... other file just returns(press enter to continue)... does this need RS232 or TELNET or IP\protocol? I'm lost. Quote Link to comment Share on other sites More sharing options...
tschak909 Posted October 14, 2018 Author Share Posted October 14, 2018 Does it not connect, at all? the TIPI build should automatically connect. -Thom Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted October 14, 2018 Share Posted October 14, 2018 I don't know what I'm trying to connect through... I normally don't have my TIPI online... I did try...maybe I need to lower the security settings on my router??? Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted October 14, 2018 Share Posted October 14, 2018 There is a curious looking red question mark over the file-name "PLATO" that reports "OS Native File". this is the file that loads the big TI logo.I lowered the ROUTER'S FIREWALL... My TI monitor is only four inches diag. so it's hard to read the text... I did see "connected" go by fast on the bottom of the screen... than the screen cleared and some text appeared at the top of screen but cleared to soon to be read... only a small strange looking character remained at lower right hand corner... the TIPI light blinks slightly on keystrokes.I am using a standard VDP driven dispay. Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted October 14, 2018 Share Posted October 14, 2018 OH... I am still using PI 1.0BETAv012DSR 2018-06-23CRU BASE 1100 Quote Link to comment Share on other sites More sharing options...
tschak909 Posted October 14, 2018 Author Share Posted October 14, 2018 ok, so that didn't fix the problem. urgh. Thanks for testing. -Thom Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted October 14, 2018 Share Posted October 14, 2018 I thought this might help... 1 Quote Link to comment Share on other sites More sharing options...
tschak909 Posted October 14, 2018 Author Share Posted October 14, 2018 Yup, appreciated. Same spot. Damn it. -Thom Quote Link to comment Share on other sites More sharing options...
Airshack Posted April 10, 2020 Share Posted April 10, 2020 On 10/14/2018 at 1:45 PM, tschak909 said: Yup, appreciated. Same spot. Damn it. -Thom Did this get resolved? I'm getting the same issue. Quote Link to comment Share on other sites More sharing options...
tschak909 Posted April 10, 2020 Author Share Posted April 10, 2020 very weird. I do not have my 99/4A set up atm, are others having this issue? -Thom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.