+9640News Posted September 12, 2018 Share Posted September 12, 2018 OK, here is what I want to do. Is there already a utility of some sort that can run under the Editor/Assembler cartridge that will allow me to save a block of memory as a program image file? Specifically, I want to save the Ram space from >6000 to >7FFF as a program image file that can be loaded as a cartridge image later. What I have is an E/A cartridge with 8K, that when I turn on my computer, has the Myarc Extended Basic 2 "cartridge" so it can load Extended Basic 2. I want to be able to save that ram as a ROM/RAM cartridge image so I can specify it in the future as a module that hopefully can be loaded by the FinalGrom cartridge. I did this with the GramKracker back in the late 80's, but no longer have the image. If someone else has a Myarc 512K card with GramKracker that can save the image that has the load 128K OS option, that would also serve my purpose. Thanks. Beery Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted September 12, 2018 Share Posted September 12, 2018 Is not this one ? (Eng) - (Language) - (Myarc Extended Basic II v2 add-on Floppy Disk) - (1985) - (MEXP-1 card + Myarc XB Cart) - (---) - (from Myarc Inc.).zip Quote Link to comment Share on other sites More sharing options...
+9640News Posted September 12, 2018 Author Share Posted September 12, 2018 I am on a computer where I can not look at the DSK image to know if the Rom/Ram gramkracker dump is within the DSK image, or if it is just the program files for the program itself. Will have to look tonight. I need the GK file of the cartridge so I move away from the EA supercart and use the FinalGrom cartridge. Beery 1 Quote Link to comment Share on other sites More sharing options...
RXB Posted September 12, 2018 Share Posted September 12, 2018 (edited) CSAVE: CSAVE UTILITY.zip Edited September 12, 2018 by RXB 1 Quote Link to comment Share on other sites More sharing options...
Tursi Posted September 13, 2018 Share Posted September 13, 2018 There's also the basic SAVE utility on the Editor/Assembler DISK A. It would require you to create a little object file that DEFs "SLOAD" and "SFIRST" as the first address of the block, and "SLAST" as after the last address. Load your data, load this little file, and load SAVE, then run SAVE to get PROGRAM image files. Not the simplest, probably, but the oldest! Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted September 13, 2018 Share Posted September 13, 2018 OK, here is what I want to do. Is there already a utility of some sort that can run under the Editor/Assembler cartridge that will allow me to save a block of memory as a program image file? Specifically, I want to save the Ram space from >6000 to >7FFF as a program image file that can be loaded as a cartridge image later. What I have is an E/A cartridge with 8K, that when I turn on my computer, has the Myarc Extended Basic 2 "cartridge" so it can load Extended Basic 2. I want to be able to save that ram as a ROM/RAM cartridge image so I can specify it in the future as a module that hopefully can be loaded by the FinalGrom cartridge. I did this with the GramKracker back in the late 80's, but no longer have the image. If someone else has a Myarc 512K card with GramKracker that can save the image that has the load 128K OS option, that would also serve my purpose. Thanks. Beery The cartridge "ram" portion is loaded by the DSR .. SO all you really need is finalgrom99 to emulate a 6k ram cart with EA and you are set It has RAM on board and can emulate a minimemory so I'd think it could do either. Quote Link to comment Share on other sites More sharing options...
+FarmerPotato Posted September 13, 2018 Share Posted September 13, 2018 (edited) OK, here is what I want to do. Is there already a utility of some sort that can run under the Editor/Assembler cartridge that will allow me to save a block of memory as a program image file? Specifically, I want to save the Ram space from >6000 to >7FFF as a program image file that can be loaded as a cartridge image later. What I have is an E/A cartridge with 8K, that when I turn on my computer, has the Myarc Extended Basic 2 "cartridge" so it can load Extended Basic 2. I want to be able to save that ram as a ROM/RAM cartridge image so I can specify it in the future as a module that hopefully can be loaded by the FinalGrom cartridge. I did this with the GramKracker back in the late 80's, but no longer have the image. If someone else has a Myarc 512K card with GramKracker that can save the image that has the load 128K OS option, that would also serve my purpose. Thanks. Beery Beery, Back in the day, Genprog's LINK tool was useful for making cartridge images. It might not fit your use case. But if one has a lot of relocatable or absolute object files and wants them organized in cartridge banks or PGM files for use on a 4A, the process can be scripted. Edited September 13, 2018 by FarmerPotato 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.