Opry99er #26 Posted November 12, 2018 Yes, mine has an adapter and so it sets close to the body of the cf7+. You should be able to do the same. Interesting. I wasn't aware such an adapter existed. I know Jamie M. eventually started building the CF7s with the more recognizable components (the 90 degree angle) but I had assumed it was a custom job, and required a different layout on the board itself. I'll have to look for an adapter. Quote Share this post Link to post Share on other sites
RickyDean #27 Posted November 12, 2018 (edited) You can get this type, as well as others by doing a search on google. As well as on Ebay. This pic came from https://usb.brando.com/dual-cf-to-ide-adapter-90-degree-_p00728c0042d015.html Edited November 12, 2018 by RickyDean Quote Share this post Link to post Share on other sites
jdgabbard #28 Posted November 15, 2018 Yeah, I agree. You should be able to just get a 90* adapter. At that point it is just matching the size characteristics. I'll try to put together a list of dimensions that I would need to design one. But I'll need accurate measurements down to the 0.5mm. Do you have a Micrometer? Quote Share this post Link to post Share on other sites
+arcadeshopper #29 Posted November 15, 2018 printing! 1 Quote Share this post Link to post Share on other sites
Opry99er #30 Posted November 15, 2018 If I make the modification, I would be happy to send you the device for measurement. Quote Share this post Link to post Share on other sites
jdgabbard #31 Posted November 15, 2018 Thats another option... it looks like the CF adapter has a female end on it. It might be as easy as desoldering it and soldering on a 90* header. Wouldnt be difficult... Quote Share this post Link to post Share on other sites
jdgabbard #32 Posted November 15, 2018 printing! Post pictures when you get it done. I want to see the quality of the print on other peoples machines. Also, what type of machine you printed it on if you dont mind. 3 Quote Share this post Link to post Share on other sites
jdgabbard #33 Posted November 16, 2018 arcadeshopper, How did this turn out? Quote Share this post Link to post Share on other sites
+arcadeshopper #34 Posted November 16, 2018 arcadeshopper, How did this turn out? Did ok may need a little support near the power switch. Prusa mk2 pla+.. It fits the nano perfectly though, very nice job! Sent from my LG-H872 using Tapatalk Quote Share this post Link to post Share on other sites
jdgabbard #35 Posted November 16, 2018 Awesome! How was the clearance for the power switch, DB9, and Power Jack? Were the LEDs sufficiently aligned? 1 Quote Share this post Link to post Share on other sites
+arcadeshopper #36 Posted November 17, 2018 Awesome! How was the clearance for the power switch, DB9, and Power Jack? Were the LEDs sufficiently aligned? Power switch is perfect.. jacks are good too.. I haven't turned it on yet as i don't use my nano much anymore since I have TIPI but first glance the led's seem good Greg 2 Quote Share this post Link to post Share on other sites
jdgabbard #37 Posted November 17, 2018 Awesome! 1 Quote Share this post Link to post Share on other sites
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord