FS or TRADE: ColecoVision bundle for modding, 2 working controllers and SAC

[bszarek001]

Hey everyone - unfortunately I have to part ways with this colecovision. Its a Canadian version (NTSC). Comes with two working controllers that Ive taken apart and cleaned. Theyre fine.

 

Also comes with a Super Action Controller. Its working in an acceptable manner. The white rocker panel that is supposed to go above the metal contacts was cracked when I bought it. I removed the cracked rocker panel and bent the metal pins up, so it works ok but needs a new rocker panel (which can be 3D printed) or it can be used for parts.

 

Finally, the console is in working condition. The case is pretty clean and labels are in tact. I was getting some rf video noise, so I took it apart and thought the rf port had a cold solder joint, which it turns out, it did. However, there ended up being other issues and now Im getting significant noise and poor picture quality. A composite mod should do the trick, but since I have no coleco experience, Im going to leave that to the experts.

 

Either way, the sum is greater than its parts, for sure. I just honestly dont have time to learn the workings of a new console.

 

I would also entertain trades for another clean ColecoVision- dont need controllers or power supply. Would prefer it modded - could add cash to deal.

 

MSG me with any questions. Thanks!