LordKraken Posted May 26, 2019 Share Posted May 26, 2019 Missed the shoot too but I think they proceed with batches. Once one is sold out, they open the pre-order for a new one. At least this is what they do for the gamecolor replacement screen. Quote Link to comment Share on other sites More sharing options...
Igor Posted May 26, 2019 Share Posted May 26, 2019 He's got 1000 coming soon, the pre-order was mostly for the prototype batch. Quote Link to comment Share on other sites More sharing options...
LordKraken Posted May 26, 2019 Share Posted May 26, 2019 1000??? Is it a figure of speech? Quote Link to comment Share on other sites More sharing options...
+karri Posted May 26, 2019 Share Posted May 26, 2019 Many of the old screens will be deteriorating in the years to come. I suppose the Lynx I units will be going first. So 1000 is not unrealistic. I have a few Lynxes with washed out screens. Quote Link to comment Share on other sites More sharing options...
Igor Posted May 26, 2019 Share Posted May 26, 2019 No, PCB assembly requires minimal viable orders, if you order too few, the cost per unit becomes astronomical, that's the reason Karri orders so many blank PCB Lynx carts at once too. You can't order anything less than around 200 and pay realistic prices for them. If you order too few, the price per unit really gets out of control. Quote Link to comment Share on other sites More sharing options...
Cyprian Posted May 26, 2019 Share Posted May 26, 2019 I'd like also to buy one Quote Link to comment Share on other sites More sharing options...
Igor Posted July 21, 2019 Share Posted July 21, 2019 The new bracket is now ready, will have a batch sent out to BennVenn this coming week. https://atarigamer.com/pages/using-the-atari-gamer-bracket-with-the-benn-venn-lcd-mod-for-atari-lynx-model-ii Quote Link to comment Share on other sites More sharing options...
Alexs Posted July 21, 2019 Share Posted July 21, 2019 (edited) I ordered a kit today, I guess I won't be recieving the new bracket ?. Is it possible to buy the new bracket seperately through AtariAge? Edited July 21, 2019 by Alexs Quote Link to comment Share on other sites More sharing options...
Igor Posted July 21, 2019 Share Posted July 21, 2019 4 hours ago, Alexs said: I ordered a kit today, I guess I won't be recieving the new bracket ?. Is it possible to buy the new bracket seperately through AtariAge? Hey Alexs, I can send you a bracket separately but it may be better if it's sent with your order. Send me a message with your order number and I'll get in touch with BennVenn and will ask them to add a bracket. I suggest waiting a week or so until the new batch of brackets arrive as they are much easier to work with than the originals. Quote Link to comment Share on other sites More sharing options...
Valdez76 Posted July 22, 2019 Share Posted July 22, 2019 I ordered the bracket the day I got an email that my order was shipping. BenVenn reimbursed me $15 shipping and combined the order. 1 Quote Link to comment Share on other sites More sharing options...
Igor Posted July 23, 2019 Share Posted July 23, 2019 Ah perfect! Quote Link to comment Share on other sites More sharing options...
Alexs Posted July 23, 2019 Share Posted July 23, 2019 On 7/21/2019 at 10:46 PM, necrocia said: Hey Alexs, I can send you a bracket separately but it may be better if it's sent with your order. Send me a message with your order number and I'll get in touch with BennVenn and will ask them to add a bracket. I suggest waiting a week or so until the new batch of brackets arrive as they are much easier to work with than the originals. Thank you so much ?, I sent you a PM 1 Quote Link to comment Share on other sites More sharing options...
pixelperfect Posted July 24, 2019 Share Posted July 24, 2019 Is this screen compatible with the Model I? I only saw a version for II on BennVenn's website. Quote Link to comment Share on other sites More sharing options...
Valdez76 Posted July 24, 2019 Share Posted July 24, 2019 No just Model 2 for now. Quote Link to comment Share on other sites More sharing options...
Valdez76 Posted July 24, 2019 Share Posted July 24, 2019 Just received my kit today. The screen is wrapped in the Fragile sticker. Quote Link to comment Share on other sites More sharing options...
Igor Posted July 24, 2019 Share Posted July 24, 2019 Oh cool! Message me if you get issues with the bracket, that's the early edition bracket which is a little harder to install than the next batch I'm sending to BV. BV is saying that Model 1 will be supported soon. 1 Quote Link to comment Share on other sites More sharing options...
Alexs Posted July 24, 2019 Share Posted July 24, 2019 Does anybody know what thickness would be best for a gasket between de screen and lens? Quote Link to comment Share on other sites More sharing options...
Igor Posted July 24, 2019 Share Posted July 24, 2019 You don't need one. I've not used any gaskets with all the brackets that I've made. Quote Link to comment Share on other sites More sharing options...
Splain Posted July 24, 2019 Share Posted July 24, 2019 Got mine in the mail, looks just like Valdez's with the FRAGILE tape and orange bracket. Didn't have time to sit down and install it yet, hopefully tonight. 1 Quote Link to comment Share on other sites More sharing options...
Splain Posted July 25, 2019 Share Posted July 25, 2019 Got mine installed. The orange bracket was a little tighter than I expected, a piece of it broke off and it bent up the metal bezel on the screen. https://imgur.com/GahpgIT So I tossed the broken bezel and kept at it. It was a trick to screw the bracket in place, it seems like the bracket was about 2-3 mm small than it was designed to be. Not sure what happened there, but I did get it installed, and I love the result! https://imgur.com/6tvZqIl Just need to fiddle with the bracket (and a file?) to get the screen positioned exactly right. Quote Link to comment Share on other sites More sharing options...
Igor Posted July 25, 2019 Share Posted July 25, 2019 Eeep! Not sure what went wrong there, but all brackets are meant to have a loose fit. Did you follow this guide? https://atarigamer.com/pages/using-the-atari-gamer-bracket-with-the-benn-venn-lcd-mod-for-atari-lynx-model-ii The new revision of the bracket doesn't have those small bits that are easily snapped off, so once those start shipping the install will be even easier. Glad you got it working in the end! Quote Link to comment Share on other sites More sharing options...
Splain Posted July 25, 2019 Share Posted July 25, 2019 Yes I did, thanks for the writeup! I wonder if my shipment sat in a hot warehouse (or truck or mailbox) for too long, because the bracket had a slight curve to it, as well as being a bit shrunken. I'm in AZ where it's nice and hot, and everything warps. I'm still glad to have the bracket, even if minor adjustments are needed for whatever reason. If anyone cares, I used some very thin 34awg enameled wire for all the data lines (everything but 5v and GND) and it works great. Quote Link to comment Share on other sites More sharing options...
Igor Posted July 26, 2019 Share Posted July 26, 2019 Sounds like that's what happened, sorry about that. I all the brackets are shipped in bulk to BennVenn and they're all flat at that time. Maybe I need to look at switching the type of plastic I use. Quote Link to comment Share on other sites More sharing options...
Retromills Posted July 28, 2019 Share Posted July 28, 2019 From the pictures and videos iv seen of this screen, it looks fantastic, really brings the games to life. I'm planning on getting one but I'm holding out at the moment as I want one for my game gear, so once that one is available I'll be buying both. @necrocia the bracket you have made looks great, really looks like it finishes the install off. Quote Link to comment Share on other sites More sharing options...
Igor Posted July 30, 2019 Share Posted July 30, 2019 If you want to see the bracket install - https://youtu.be/AR-xyS-rqus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.