Greendude Posted February 9, 2019 Share Posted February 9, 2019 I finally decided to order the av mod kit for my atari 2600 jr. I see most av mods have the rca plugs connected on the right side. I saw one person selling a jr that had the rca's put where the power connector is at but I see too intruding. Is there a way to put the those 3 connectors where the rf connector is at right now? Of course I have to take the rf out but is it possible. Quote Link to comment Share on other sites More sharing options...
H454 Posted February 20, 2019 Share Posted February 20, 2019 https://www.youtube.com/watch?v=83x-wIOFS1o Watch the vid above. I've done this a couple of times. Hardest part is finding the TRRS jack (four pole for a stereo mod). You may need to slightly enlarge the hole in the sheet metal and/ or the case as well. A stepper drill bit is self centering and makes it much easier than filling the holes larger. I've also had to use a dab of epoxy to make sure the jack didn't pop out of place. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.