Jump to content
H454

ProNES 7800 GamePad Adapter - osman - Info?

Recommended Posts

The NES to 7800 adapter I saw on the Rikki & Vikki review from the 8-bit guy had NES game pad to 7800 adapters.

Has anybody bought these from somebody or made them personally?

Literally all I can find info wise is the website of the guy who designed them:

http://tailchao.com/ProSystem/index.php

or a post from the Rikki and Vikki thread comes up about someone else wanting them.

That site has Gerber files to make the pcb, but programing micro-controllers is out of my wheel house.

 

Any info would be great,

Thanks!

 

 

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Ah, this crazy thing is my design.

 

These were made for members of the Rikki & Vikki development team and also given to reviewers as a bonus item. Unfortunately they're not available for purchase, I only made around twenty of them by hand and those are nearly all gone.

 

I'm currently working on a Segafied and simplified version which is a little more DIY (doesn't require any microcontroller), and will offer the same feature set with emulation of one or two-button joysticks. Once these are ready, I'll release the design for free and make a new topic here.

Edited by TailChao
  • Like 2

Share this post


Link to post
Share on other sites

Ah, this crazy thing is my design.

 

These were made for members of the Rikki & Vikki development team and also given to reviewers like as a bonus item. Unfortunately they're not available for purchase, I only made around twenty of them by hand and those are nearly all gone.

 

I'm currently working on a Segafied and simplified version which is a little more DIY (doesn't require any microcontroller), and will offer the same feature set. Once these are ready I'll release the design for free and make a new topic here.

 

 

The Sega adapter has been beat to death and many flavors are readily available on the market. The NES one you have going here would be more appealing to more people to purchase I'm sure, if that was what you where looking to do.

  • Like 1

Share this post


Link to post
Share on other sites

The Sega adapter has been beat to death and many flavors are readily available on the market. The NES one you have going here would be more appealing to more people to purchase I'm sure, if that was what you where looking to do.

The Sega adapter has been beat pretty far, but not to death.

 

What's available only emulates Atari's two-button controller setup, whereas the ProNES (and upcoming ProSMS) have switchable one or two-button joystick emulation. They're also more likely to work if some of the input circuit is damaged (especially Q5, Q6, or Q8). This is basically the "bling" version, so if you're happy with the current SMS or Genesis adapters there's little reason to upgrade.

 

I'm not looking to sell these, and really don't have the resources to mass produce them alongside a game. So at least for now they're strictly a DIY option unless someone else would like to sell them (which is totally fine).

  • Like 2

Share this post


Link to post
Share on other sites

An option for a DIY of that NES adapter would be something I'd personally be interested in buying if that means anything.

  • Like 2

Share this post


Link to post
Share on other sites

An option for a DIY of that NES adapter would be something I'd personally be interested in buying if that means anything.

me too

  • Like 1

Share this post


Link to post
Share on other sites

If you do change your mind, I'd also be interested in purchasing a couple of the NES adapters, assembled or not. My micro-switch converted Advantage would work great with R&V.

  • Like 2

Share this post


Link to post
Share on other sites

A bog standard Edladdin adaptor with a cheap-and-awesome Genesis Asciiware Powerclutch stick works wonderfully, if you don't want to wait. Skip the genesis pads. These sticks work better than the NES advantage IMHO.

  • Like 2

Share this post


Link to post
Share on other sites

Well sure, but this is no ordinary Advantage.

The return spring tension has been adjusted to my preference. The friction ball has been lubricated. I swapped out the stick's rubber dome pcb(the domes were long ago crushed) for one upon which I installed tac switches, giving nice feedback(but not clicky,) and reducing the throw by about a millimeter in each direction.

 

It's a much more accurate and comfortable option now IMO than the basic NES controller. But I'm not much of a dpad person.

 

post-47453-0-65277300-1552961235.jpg

  • Like 2

Share this post


Link to post
Share on other sites

Well sure, but this is no ordinary Advantage.

The return spring tension has been adjusted to my preference. The friction ball has been lubricated. I swapped out the stick's rubber dome pcb(the domes were long ago crushed) for one upon which I installed tac switches, giving nice feedback(but not clicky,) and reducing the throw by about a millimeter in each direction.

 

It's a much more accurate and comfortable option now IMO than the basic NES controller. But I'm not much of a dpad person.

 

attachicon.gifBetter_Advantage.JPG

 

That is Badass!

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

If you start around 5 minutes in, my video shows a good way to get NES controllers working on the 7800 with two button game compatibility. Enjoy :)

 

Edited by ave1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...