+dhe Posted March 31, 2019 Share Posted March 31, 2019 I can't remember. Did anything get worked out so 9640 Guys can run UCSD Pascal on the Geneve? Thanks, Dano 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted March 31, 2019 Share Posted March 31, 2019 Hi, don´t ask me more about it 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted March 31, 2019 Share Posted March 31, 2019 (edited) ISTR that Dr. Coffey figured out what needed to be set properly in the runtime program to allow it to work (using all of the /4A disks). I believe it may even be up on WHT (on one of the 9640 News disks?). Edited March 31, 2019 by Ksarul 1 Quote Link to comment Share on other sites More sharing options...
+9640News Posted March 31, 2019 Share Posted March 31, 2019 If we are talking about the Psystem, the 9640 News disks would not have the information. Tim may know a bit more as I have seen some references someone added (presumably Tim) late 90's or early 2000's when I was doing other non TI stuff. Beery 1 Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted March 31, 2019 Share Posted March 31, 2019 Beery might be referring to the PSYS command that I added, which modifies the manner in which TTYOUT outputs one or two of the formatting control codes. As I recall Mike M. had it running on his Geneve; I just checked the platter that I was given back then and I see nothing related to pascal on it. Seems to me there was a need to mount the disks or convert them to make them work with the Geneve? Sorry,I don't remember much else.... 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted March 31, 2019 Share Posted March 31, 2019 I know the pSystem runtime was released, and as noted, I think it was done by Jerry Coffey. I'll have to look around to see if I have it somewhere, but I'm pretty sure I got it from WHT at some point. I just looked there and found what I think is it in the Geneve MDOS directory. Just look for the PSYSTEM folder. 1 Quote Link to comment Share on other sites More sharing options...
+9640News Posted March 31, 2019 Share Posted March 31, 2019 If you or someone else figures out how to run the PSYSTEM, and what files are needed, please post. It's been way too long...….. Beery 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted March 31, 2019 Share Posted March 31, 2019 It should be just the runtime program and one of the pSystem disks inserted into drive 1. . .I'm pretty sure it auto-launches once you start the runtime, just like it does on the /4A. 1 Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted March 31, 2019 Share Posted March 31, 2019 I might be mixing memories here, though it seems to me you could (had to?) mount the disks. Maybe that was only for running them from a hard drive device, as I seem to recall Mike copying the disks into an image much like an emulate file. 1 Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.