Bikerbob Posted April 5, 2019 Share Posted April 5, 2019 Hey people, have not gotten around to running R4 until tonight. It would not make a connection to the AtariMax SIO2PC serial. I did not remove R3 from the pc running windows xp. So I run R3 and it works fine. I do notice that R3 in a seperate dir does take the settings from the R3 install, so I assume they are using some common files in the user directory?? So, R3 working..same everything.. R4 not.. any ideas? James Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted April 5, 2019 Share Posted April 5, 2019 (edited) yeah, make a directory for r4 then copy r3 to it, then copy the r4 files into that directory as well... then run r4 from inside that directory... go to the options/settings and set it all up don't forget the edge setting.... give it a try, if it works, toggle the edge setting, if it still works you are golden.... then if you try an atx image and it doesn't work out try the edge toggle again.... if it works leave the setting that way for the future and enjoy! happy days are here again... Edited April 5, 2019 by _The Doctor__ Quote Link to comment Share on other sites More sharing options...
Bikerbob Posted April 5, 2019 Author Share Posted April 5, 2019 Edge setting... ok.. never heard of that. James Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted April 5, 2019 Share Posted April 5, 2019 (edited) It determines if the serial port acts on the rising of falling edge of the rs232 signal... changed the timing a bit.. Edited April 5, 2019 by _The Doctor__ Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted April 6, 2019 Share Posted April 6, 2019 (edited) Attached is my full RespeQt folder. This one works GREAT for me. RespeQt-r4.zip Edit: If there is any location depending stuff, I had this folder under C:\Program Files\ Edited April 6, 2019 by Kyle22 2 Quote Link to comment Share on other sites More sharing options...
JoSch Posted April 15, 2019 Share Posted April 15, 2019 Edge setting... ok.. never heard of that. Did you get your installlation to work? Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.