Jump to content
Jin

Retro-Bit Sega Genesis 6 Button Arcade Pad Review & Comparison

Recommended Posts

Posted (edited)

Hey there guys and gals! :) This afternoon I got a couple of Retro-Bit's new 6 Button Sega Genesis controllers in the mail from Amazon, and since a lot of folks around here have been curious about them I thought I'd take a few minutes to do a little review of these controllers and compare them to Sega's own 6 button controller from back in the day. First off let's take a look at the packaging.

 

 

g5TpN4A.jpg

 

aju0FxR.jpg

 

 

Retro-Bit did a really nice job on the box, which as far as I can tell looks almost identical to the boxes that Sega shipped their 6 button controllers in back in the 90's. The plastic insert inside the box that holds the controller in place is rather flimsy feeling, but the controller it holds is most certainly not. To cut straight to the chase, let's take a look at Retro-Bit's offering next to an original 6 button Genesis controller from 1994 that I purchased brand new on eBay a couple months ago and have only put a few hours of use on since then.

 

Bae5JvF.jpg

 

tE7cgYn.jpg

 

 

From the outside it's clear that Retro-Bit's partnership with Sega on this project was a fruitful one. The color, feel, fit and finish of the controller's shell is absolutely identical to the original Sega controller and the cord looks and feels the same as well; with the only difference being that the Retro-Bit controller features a 10 foot long cord as opposed to the 6 foot cord on the Sega controller. Aside from the lack of a "TM" next to the Sega logo on the front and the addition of the Retro-Bit logo on the back, the text on the controller is just the same as the original and the only obvious difference is that the finish on the D-pad and A/B/C buttons on the Retro-Bit controller have a soft matte texture to them whereas the D-pad and A/B/C buttons on the original controller are slightly glossy. As long as we're on the subject of the D-pad and buttons, when pressed down the only difference I could feel between Retro-Bit's D-pad and buttons and the original were that the Retro-Bit ones required ever so slightly more pressure to activate; somewhere in the area of 3 to 5 grams of actuation force if I had to venture a guess.

 

To give them a proper test with a fairly demanding game I popped Mortal Kombat II into my Genesis and first did a full play through of the tournament mode with my original Sega controller, then upon beating the tournament did a second play through with the Retro-Bit controller. After two play through's of MK II's tournament I'm pleased (and a little surprised, to be completely honest) to say that I could find no discernible difference in build quality or function between Retro-Bit's new Genesis controller and Sega's original from 1994. During the 45 minutes or so I spent playing through MK II's tournament mode with the Retro-Bit controller I never once experienced a false input and in practice the tiny bit of extra force required to move the D-Pad and buttons was negligible. My thumbs didn't feel any more tired after playing with Retro-Bit's controller than Sega's and none of my movements felt any slower or less precise.

 

In order to get a better idea of why Retro-Bit's controller performed every bit as good as Sega's original, let's open them up and take a look inside.

 

uokihrO.jpg

 

DPJWCWp.jpg

 

 

Peering inside, it quickly becomes apparent why Retro-Bit's new Genesis controller performs so well. It is in every respect, down to the millimeter, an exact copy of the original Sega design. They are so identical that I would be very surprised if they weren't using the same mold that the originals were made with. With the exception of the screws that secure the two shell halves together (which are slightly longer on the Sega controller) every part is 100% interchangeable between the two controllers. In fact, when I swapped the silicone button and D-pad contact pads from the Sega controller into the Retro-Bit one the actuation force required to press the D-Pad and buttons became exactly the same as the Sega controller had; which makes it pretty clear that the only reason the Retro-Bit controller's buttons and D-pad required a tiny bit more force to press is because it has brand new silicone pads in it and the Sega controller's silicone pads are about 25 years old at this point.

 

The especially nice thing about Retro-Bit's controllers being internally identical to the original Sega ones is that if you do ever manage to wear out the silicone button contacts or any other part then they can be easily replaced with any of the numerous replacement parts on the market made for Sega's original controllers. With that future proofing in mind I give Retro-Bit's Sega Genesis 6 Button Arcade Pads my highest recommendation.

 

Never in my life have I encountered a third party controller for any system that was such a perfect copy of the original first party controller as these, and at only $15 each and officially licensed by Sega there's absolutely no reason whatsoever that I can think of to go try and hunt down a used original Sega controller when Retro-Bit's new Genesis controllers are available. They are, for all practical purposes, the exact same controller. Whether your looking for some top quality wired controllers to pair with your new Analogue Mega Sg or just need a good controller or two for your trusty old Genesis, I don't think you'll find a better option than Retro-Bit's Sega Genesis controllers anywhere; past or present.

Edited by Jin
  • Like 9

Share this post


Link to post
Share on other sites

Yes I finally played some wolf3d using my new retro-bit controller on my Genesis this weekend. It pretty much felt the same as my normal 6-button Sega pad I use and didn't have any ghosting direction issues etc that I've had with other third party controllers in the past. I opted for the clear blue shell controller and it looks fantastic!

 

There is one very slight difference on the boxes that these come in compared to the original Sega ones. The Genesis logo is embossed with a shiny foil to make it stand out more. I seem to recall the originals were just printed with black lettering on them. Yes..yes this doesn't have anything to do with the controller themselves, but it sure does make the rest of the presentation look that more snazzy!

  • Like 1

Share this post


Link to post
Share on other sites

Excellent stuff. I don't really *need* these since I already have some official six button pads, but I may still grab one anyway. Them pretty much being a perfect 1-to-1 of the originals makes me happy. I can't say the same for the one Hyperkin put out many years ago.

Share this post


Link to post
Share on other sites

Thanks Jin for the review! It is great to hear positive news like this.

 

Be awesome if they would make a new 3 button version!

Share this post


Link to post
Share on other sites

Thanks for the pictures and write-up. I was looking everywhere for info on this. I was going to tear mine down but I don't have any originals (only Hyperkin GN6) to compare them to. These feel much better. Shorter button throw and a better d-pad than my other third party 6 button controllers. So glad that classic gaming just keeps getting better and lives on. Now, to find one for the Saturn.

  • Like 1

Share this post


Link to post
Share on other sites

These are very good, but the 8bitdo wireless Genesis pads are so damn good, I rarely use anything else these days.

Great review and teardown!

Share this post


Link to post
Share on other sites

This is an outstanding and very informative review. I love these controllers and they deserve more exposure. Excellent quality stuff. Thanks for posting this.

  • Like 1

Share this post


Link to post
Share on other sites

There is also talk about the controllers here. I liked the controllers quite a bit myself, but the response here was more negative and the controller is lumped in with the GN6 and Old Skool clones. Also, while the controller is close, the pad presses down, unlike many of the originals. I didn't feel it affected anything, though.

Share this post


Link to post
Share on other sites

There is also talk about the controllers here. I liked the controllers quite a bit myself, but the response here was more negative and the controller is lumped in with the GN6 and Old Skool clones. Also, while the controller is close, the pad presses down, unlike many of the originals. I didn't feel it affected anything, though.

 

If you press the whole dpad down, are all four directions activated? If you're pressing left or right, is it easy to unintentionally hit diagonals? That kind of thing would render shmups unplayable. I was on a good run in the Gradius III SA-1 hack today until my 8bitDO SNES pad hit a diagonal when I was flying to the right and I crashed into the boss.

Share this post


Link to post
Share on other sites
Posted (edited)

 

If you press the whole dpad down, are all four directions activated? If you're pressing left or right, is it easy to unintentionally hit diagonals? That kind of thing would render shmups unplayable. I was on a good run in the Gradius III SA-1 hack today until my 8bitDO SNES pad hit a diagonal when I was flying to the right and I crashed into the boss.

It didn't seem to press all four directions when I pressed down (I tried to press straight in the middle and inputs only registered when the controller tilted) and diagonals aren't like the super nt colored 8bitdo non pro sf30s with oversensitive diagonals. Edited by BrianC

Share this post


Link to post
Share on other sites

I picked up four of these bad boys, they're great. Nice review Jin, great photos! I have some originals, some of the Majesco ones (with the turbo buttons) and these retrobit ones are virtually identical. Like you, I noticed a sligt bit of feel diffence in the buttons but perhaps once they get worked in they will react exactly the same way. The originals seem to have a bounce, in a good way.

 

I am also glad to see that the boards are the same, at these prices I would be happy to just cosmetically upgrade my old guts into new shells!

 

The USB ones coming out are compatbile with the upcoming (amazing) Genesis Mini so I need to grab a couple for that too.

 

For anybody on the sidelines, fret not. They are the real deal. I even prefer them over 8Bit-do pads, and those are about as good a 3rd party product as it gets.

 

It's shaping up to be a great year for all things Genesis!

  • Like 2

Share this post


Link to post
Share on other sites

 

If you press the whole dpad down, are all four directions activated? If you're pressing left or right, is it easy to unintentionally hit diagonals? That kind of thing would render shmups unplayable. I was on a good run in the Gradius III SA-1 hack today until my 8bitDO SNES pad hit a diagonal when I was flying to the right and I crashed into the boss.

It does not. I know what you mean though. There was a Majesco 6 button controller that had that weirdness on the DPad. Not so with these.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...