m_emelchenkov Posted April 21, 2019 Share Posted April 21, 2019 (edited) Hi all! In Vectrex service manual you can find info about troubleshooting, one of paragraphs contains instructions to measure 5.8 KV voltage. My oscilloscope can't handle it even with 1000:1 probe which I have, my digital multimeter don't have a such large limit also. What equipment do you use for these measurements? Edited April 21, 2019 by m_emelchenkov Quote Link to comment Share on other sites More sharing options...
chopperthedog Posted April 21, 2019 Share Posted April 21, 2019 Something like this. https://www.amazon.com/Precision-PR-28A-Voltage-Attenuation/dp/B004PA02Q8/ref=sr_1_3?hvadid=174243724235&hvdev=c&hvlocphy=9016223&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=11392692131395151412&hvtargid=kwd-143892415&keywords=high+voltage+probe&qid=1555853674&s=gateway&sr=8-3 good day. 2 Quote Link to comment Share on other sites More sharing options...
ChildOfCv Posted April 21, 2019 Share Posted April 21, 2019 Neither the oscilloscope nor the multimeter can handle more than 10V? Because the 1000:1 probe is supposed to pull the 5.8kV down to 5.8V. Surely a meter should handle that. Quote Link to comment Share on other sites More sharing options...
m_emelchenkov Posted April 21, 2019 Author Share Posted April 21, 2019 (edited) Indeed, I have only 100:1 oscilloscope probe, it was a typo. I checked prices of 1000:1 probes before and found only very expensive. Now with your help I checked again, both for multimeters and oscilloscopes and there are good variants. Thanks for help! Edited April 21, 2019 by m_emelchenkov Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.