mamejay Posted June 10, 2019 Share Posted June 10, 2019 Hey everyone, Someone has asked me to mod a Intellivision II console for AV. I have followed the schematic at http://wiki.intellivision.us/index.php?title=Intellivision_Composite_Video_Modification I have built 2 circuits on bread board and then tried to build one just laying out the parts and soldering the legs together so I can get a better picture of what i could be doing wrong. I am getting no signal at all. Normally on my CRT I will get some signal but I am getting nothing. I can tune in to RF no problems. I have attached pictures of where I am tapping 5v and also the circuit I am using. All values are exactly as the schematic except for the 660Ohm which I am using a 680Ohm resistor. Can some of the fine people at AA have a love over the circuit and see if I am missing something? Thanks Quote Link to comment Share on other sites More sharing options...
mamejay Posted June 10, 2019 Author Share Posted June 10, 2019 Found the issue. Had a 22k instead of a 22 ohm resistor. Replaced this and got picture. Now I have heaps of static which looks to be common going from another thread on AA but looks like there is no solution. Think I might put this one to bed now as have spent far too long in it. Quote Link to comment Share on other sites More sharing options...
+-^CrossBow^- Posted June 10, 2019 Share Posted June 10, 2019 Yeap I answered your post in the other thread. I've tried to AV mod two separate Intelly 2 units and neither of them gave me what I called acceptable results. One turned out a bit better than the other but I still was never quite happy with it. The common composite AV kits that are out there really only work well on the Model 1 Intelly units and that is all I will offer to AV mod with composite because of this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.