Jump to content
Tillek

General Discussion

Recommended Posts

Have you ever considered switching to one of the UDS models for a solution?

 

I would consider it much less complicated than getting the NetUSBee going...

 

  • Like 1

Share this post


Link to post
Share on other sites
23 minutes ago, DarkLord said:

Have you ever considered switching to one of the UDS models for a solution?

 

I would consider it much less complicated than getting the NetUSBee going...

 

 

I agree. Plus, a Lantronix UDS-10 can usually be purchased pretty cheaply off eBay. On the ST, you can use a standard RS232C cable (and a standard network cable) with the device. I recently purchased my RS232C cable off Amazon.

 

-JP

 

Edited by JohnPolka

Share this post


Link to post
Share on other sites

I have a multi node BBS going until I get the Atari ST BBS running , it will be at 99.250.141.63 port 23 until further notice, with a dial up line at 226-647-0710 once I get my main IP address figured out I will let you all know when it is up, I am using Syncronet  BBS for now, a 2019 version that supports big hard drives, like anything else there is a learning curve, I will of course enable atascii when I get it online.

 

Edit: Forem ST is verified by myself from a different modem and an Atari Portfolio, It is working OK now....

 

Edited by rcamp48
addition

Share this post


Link to post
Share on other sites
16 hours ago, rcamp48 said:

I have thought of it but no money

 

 

Yeah, I understand...however, when you do get some extra cash, Lantronix UDS-10s can be found cheap on eBay...I just saw one posted for around $20 with a serial cable and power supply. The prices do vary quite a bit on eBay, so don't get discouraged if all you see are high priced ones. Inexpensive working ones do show up. They were once used in a variety of applications including security systems. When someone strips out an old security system, they will typically post them for sale cheap on eBay. Mine was once used in a security system and it works great.

 

-JP

 

Edited by JohnPolka

Share this post


Link to post
Share on other sites

OK I will look, right now I am working on a disassembly of Forem ST, the Forem.Tos file, I will post it here later on

 

Share this post


Link to post
Share on other sites
On 6/30/2019 at 6:35 PM, DarkLord said:

Have you ever considered switching to one of the UDS models for a solution?

 

I would consider it much less complicated than getting the NetUSBee going...

 

Gonna buy one tonight if I can find one on ebay ... Russ

 

Share this post


Link to post
Share on other sites

There are usually a few around. If you're lucky, you can get multiple ones for a low

price. I've had that happen a couple of times.

 

Share this post


Link to post
Share on other sites

Sorry, but I don't pay attention to the [S]hit of [T]ramiel Commie types.

Lorraine is hot, though.

:)

 

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...