Jump to content
Sign in to follow this  

Geneve 9640 DIN Video to DB9

Recommended Posts

I was thinking for all the Geneve users out there that may have a RGB monitor and hate soldering the din connector to cables.


So... I came up with this.  a standard din 8 pin that is used on cables will solder directly on one side and on the other a  DB9 Male.  Plugs right in to the Geneve then you can make your own cables easily with db9 connectors.










Edited by Shift838
  • Like 3

Share this post

Link to post
Share on other sites

I have ordered a few.  a Geneve'r will need to make their own cable for the DB9 but it's a hell of a lot easier than messing with the DIN connectors.

  • Like 1

Share this post

Link to post
Share on other sites

I got the test boards in.  Put one together and decided to interface it with a GBSGenie EVPC board with a GBS8200 since I had an awesome case for use for the GBS8200 from Corei64 (HERE).  I just had to drill a hole for the audio pigtail.


the DB9 converter board fits nicely on the back of the Geneve video socket.  I have used a small pigtail for audio.


See pics.  It works great with the Geneve.  Good clear picture and hooked up VGA!










Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...