Jaime Miguel Posted June 18, 2019 Share Posted June 18, 2019 Hi folks. Need some advice here. Picked up a 2600A 4-switch woodie last week. Beautiful optics, but when I plug it in, I just get static. Tried it on a modern flat screen, first with the RF switch and then bypassing the RF switch with an RCA-Coax adapter. Tested with a bunch of old games, same results. There's a little bit of "glitter" on the screen when I hit the reset, but nothing happens. Any ideas on what might be wrong with the unit ( or my setup ) would be appreciated. Thanks! Link to comment Share on other sites More sharing options...
+ZeroPage Homebrew Posted June 23, 2019 Share Posted June 23, 2019 Hi Jaimie, looks like you posted your question in the wrong forum. This forum is for the 2018 Atari Awards that were held earlier this year. You might want to post it in the Hardware section or in the Atari 2600 section of the forums. - James Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts