Spaceman Spiff Posted June 21, 2019 Share Posted June 21, 2019 Hello, i have a Tandy 1400 lt laptop and had a question. Inside each floppy drive there is a dip switch labeled 0-2 (adjacent to the i/o cable connection). What should the switch be positioned on for both drives to work properly? thanks!! Quote Link to comment Share on other sites More sharing options...
Great Hierophant Posted June 28, 2019 Share Posted June 28, 2019 The switches determine which drive is effectively going to be drive A, drive B and drive C. Make sure one of them is set to 0 and the other is set to 1 unless you're booting from an external drive. There is another switch for that on the side of the computer. If you are booting externally, then neither drive should be 0 and one of them has to be 2. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.