FRK Posted June 23, 2019 Share Posted June 23, 2019 Hi Guys, First post so sorry if its been covered a million times before but couldn't find a result when I searched. 1:Can the screen on a Lynx 2 be replaced with a new/aftermarket one ? 2:Can you somehow , de scratch the screen with some sort of paste ? 3:Any thoughts welcome.. Thanks Mike FRK Quote Link to comment Share on other sites More sharing options...
power Posted June 24, 2019 Share Posted June 24, 2019 (edited) yes - unsure about the replacement front lens, someone might be able point you in the right direction. i'd say yes you'd probably just have to track one down, they are just stuck there with a bit of tape. Edited June 24, 2019 by power Quote Link to comment Share on other sites More sharing options...
+karri Posted June 25, 2019 Share Posted June 25, 2019 The Lynx 2 plastic screen is attached by 4 clips that are prone to break. The quality of the plastic is also quite bad compared to glass or nothing. You could check with http://www.best-electronics-ca.com They have a lot of spare parts. Another choice is to use some cleaning products to polish away the scratches. I had one plastic that was really cracked. So I just milled away the transparent part of the plastics and used the Lynx 2 with no plastic cover for the LCD. For this screen I also added polarizing filters from an old laptop LCD between the lamp and the original Lynx LCD. The result was a lot better contrast. Quote Link to comment Share on other sites More sharing options...
Insert Coin Posted June 28, 2019 Share Posted June 28, 2019 I have used Displex Classic with success on a mildy scratched Lynx display. If the scratches are deep it won't work though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.