Jump to content
Albert

Wanted: Common Atari 2600 and 7800 Cartridge Shells

Recommended Posts

Greetings!

 

I am looking for common Atari 2600 and 7800 cartridge shells, for recycling into new homebrew games.  I do plan on having new shells made soon (I'm really tired of having to recycle shells), but that's not going to happen before the end of the year.  Thus, I need to make sure I have plenty of shells to use for the new games being introduced at the upcoming Portland Retro Gaming Expo in October, as well as when I add these new games to the store in November. 

 

I'll give $1 in store credit for 2600 shells and $3 in store credit for 7800 shells, plus the cost of shipping to get them to me. 

 

Here are my requirements for the cartridges (please read!)

 

  • For 2600 games, I can use any shells from Atari and Sears.  For the 7800, only first-party Atari shells.
  • For 7800 shells, please make sure BOTH PEGS at the bottom of the cartridge are present.  These break off fairly easily.
  • Cartridges MUST BE CLEAN.  Especially on the back of the shell, but on any of the textured surfaces.  It's very difficult removing dirt and stains from the textured surfaces of cartridges. 
  • Cartridges must be free of permanent markings.  Such as markers, etchings (I see this more than you'd think!), nail polish, and so forth.  Writing on the labels is fine, since those will be removed.
  • Cartridges must be free from defects.  No dog chew marks, no broken pieces, melted plastic, etc.  I've seen it all!

 

To make this worthwhile, you should have at least 20 carts to send in.  Shipping just makes these quite a bit more expensive for anything less than that.  USPS Priority Mail Flat Rate boxes (medium and large, and some other oddball sizes they have) work well for 40+ cartridges.  For larger amounts (100+), UPS Ground and/or FedEx Ground may be less expensive.

 

Please send me a PM if you can help out, thank you!

 

 ..Al

Share this post


Link to post
Share on other sites
8 minutes ago, masschamber said:

I have a mess of both I can send 25+ 7800, a whole lot of 2600,

Great, thank you!

 

 ..Al

Share this post


Link to post
Share on other sites

I'm still looking for common 2600 and 7800 cartridge shells.  If you have some that you'd like to part with, please take a look at the first post in this thread and drop me a line!

 

Thanks!

 

 ..Al

Share this post


Link to post
Share on other sites

I'll go through my carts and see what I have. 

 

I sent you a PM a while back though.  Did you get a chance to read it?  It's not related to these carts but I thought I would ask.  lol

 

 

Share this post


Link to post
Share on other sites
On 11/15/2019 at 11:19 AM, King_Salamon said:

I'll go through my carts and see what I have. 

Thank you!

On 11/15/2019 at 11:19 AM, King_Salamon said:

I sent you a PM a while back though.  Did you get a chance to read it?  It's not related to these carts but I thought I would ask.  lol

I just dug up the PM and responded.

 

 ..Al

Share this post


Link to post
Share on other sites

Bumping this again, as I can still use more 2600 and 7890 shells. One of my goals in 2020 will be to have new shells made so I no longer need to do this!!
 

Thank you,

 

  ..Al

Share this post


Link to post
Share on other sites
15 hours ago, King_Salamon said:

2600 Silver Label carts are good to go as well?  I might have 20 or so that I can send in.  :)

Yes, those are just fine. Thank you!

 

 ..Al

Share this post


Link to post
Share on other sites
On 12/31/2019 at 1:41 PM, Albert said:

Yes, those are just fine. Thank you!

 

 ..Al

Check your PMs... I have a batch to send you.  It's not much but every shell is sacred!  lol

Share this post


Link to post
Share on other sites
On 12/30/2019 at 11:26 AM, Albert said:

Bumping this again, as I can still use more 2600 and 7890 shells.

Al, are 7890 shells similar to 7800 shells? 😛

Share this post


Link to post
Share on other sites
5 minutes ago, sixersfan105 said:

Al, are 7890 shells similar to 7800 shells? 😛

7800 shells are either the open ended shell without a dust shield.  The dust shielded ones are not like regular 2600 cart they are just on a spring and you can press it in with your finger. The other,and more common, style is the universal style cart without a dust shield at all.  It is the same cart Ataricorp used in the late release 2600 games.

Share this post


Link to post
Share on other sites
4 minutes ago, atari181 said:

7800 shells are either the open ended shell without a dust shield.  The dust shielded ones are not like regular 2600 cart they are just on a spring and you can press it in with your finger. The other,and more common, style is the universal style cart without a dust shield at all.  It is the same cart Ataricorp used in the late release 2600 games.

Ha, I know about the different types of 7800 shells; I was just making fun of Al's typo!

Share this post


Link to post
Share on other sites
11 minutes ago, sixersfan105 said:

Ha, I know about the different types of 7800 shells; I was just making fun of Al's typo!

HAHA, my bad.  i thought you should know that!

  • Like 1

Share this post


Link to post
Share on other sites
On 1/13/2020 at 10:16 AM, King_Salamon said:

Check your PMs... I have a batch to send you.  It's not much but every shell is sacred!  lol

Will check, thank you!

 

 ..Al

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...