Macross_VF1 Posted August 9, 2019 Share Posted August 9, 2019 So I have an issue with my Philips Videopac G7400. It outputs a piss poor RF signal, no matter how much I try to tune the TV. When I started digging around the net I saw that it was easy to convert to RGB, just a matter of installing a number of components. https://www.the-nextlevel.com/odyssey2/articles/g7400guide/rgbmod.php Unfortunately, nothing improved. As can be seen in the attached image (the image was taken while using RGB), the signal is still distorted and it does not matter if it is RF, composite or RGB. Anyone have any idea what the problem might be? I have tested the internal AC adapter and it outputs pretty much the correct voltage, 4.95V on one line and 11.43V (should be 5 and 12V respectively) on another. Quote Link to comment Share on other sites More sharing options...
Macross_VF1 Posted August 10, 2019 Author Share Posted August 10, 2019 No matter, it's dead now. I tried reseating the socketed chips and I must have damaged at least one because it only shows a black screen. FML Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.