doctor_x Posted October 10, 2019 Share Posted October 10, 2019 I've noticed in some user pictures they show themselves using their atari with a very mini sized flatscreen monitor in color. Im guessing this is only possible with something like Lothareks XBXE product. Obviously I can google and have found a ton of things but I was wondering what the general consensus was about the best one to buy? Thanks!!! docx Quote Link to comment Share on other sites More sharing options...
jacobus Posted October 10, 2019 Share Posted October 10, 2019 docx - I suggest looking for a small TV instead of a monitor. A few years ago I found a small (19") 720p flat screen TV with inputs for composite, svideo, VGA and even coax. Under $100 (Canadian), works great! 1 Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted October 10, 2019 Share Posted October 10, 2019 See attached, an older flat screen TV, it is also a tv/monitor and has many inputs including SCART which connects directly from my 130XE, you need something like this. It also has VGA for PC. 1 Quote Link to comment Share on other sites More sharing options...
Gunstar Posted October 10, 2019 Share Posted October 10, 2019 (edited) I think he's referring to something a lot smaller, though these small ones are probably the same as far as inputs go. The early 4:3 screen ratio LCD TV/monitors were generally classified as 'Enhanced Definition" as they were generally 480p (NTSC) instead of 480i like old CRT's. Edited October 10, 2019 by Gunstar 1 Quote Link to comment Share on other sites More sharing options...
mimo Posted October 10, 2019 Share Posted October 10, 2019 Sony pvm 1 Quote Link to comment Share on other sites More sharing options...
Wrathchild Posted October 10, 2019 Share Posted October 10, 2019 I'm pretty sure I've seen a modded PS1 LCD screen connected to an Atari, perhaps at one of the Czech AtariAda's? Quote Link to comment Share on other sites More sharing options...
Gavin1968 Posted October 10, 2019 Share Posted October 10, 2019 1 hour ago, Gunstar said: I think he's referring to something a lot smaller, though these small ones are probably the same as far as inputs go. The early 4:3 screen ratio LCD TV/monitors were generally classified as 'Enhanced Definition" as they were generally 480p (NTSC) instead of 480i like old CRT's. As long as they have composite it works fine. IMHO nothing works as well as a CRT, but I am old school. I have used several LCD TV's on my original 800 but happy to have an Amdek now for it. Quote Link to comment Share on other sites More sharing options...
Gunstar Posted October 10, 2019 Share Posted October 10, 2019 (edited) 33 minutes ago, Gavin1968 said: As long as they have composite it works fine. IMHO nothing works as well as a CRT, but I am old school. I have used several LCD TV's on my original 800 but happy to have an Amdek now for it. I am a fan of both for different reasons, and though I am only using LCD atm, I will have one Atari with 1084 CRT and one with LCD eventually for the best of both worlds. I prefer CRT over-all, but one thing I really like about LCD displays is no scan-lines and no skipped scan-lines for a 192-240p screen, this doubles the color saturation of the screen images as there are no black/empty scan lines every other line and is much better for mixed GTIA modes that I work with a lot for maximum colors. But some games used certain aspects of CRT, like the natural anti-aliasing and so they look better on CRT; this is best though when the machine is using 480i resolution, which most computers before the 90's and most console in the 90's didn't have, they only did 240p, skipping scan-lines. The 3DO system was the first console to use interpolation with a 320x240p graphics within a 640x480i window, so there were no skipped scan-lines and it was more like 240p on LCD's, except for the interlace flicker and it looks a lot better to me than the Jaguar, Saturn and PS1 that still used 240p. I think the N64 still used 240p too, so it wasn't until the Dreamcast that we had true 480i. Of course the smaller the CRT screen, the less noticeable the skipped scan-lines become. I remember playing the Saturn on a 36" CRT back in the 90's and I thought it looked terrible because the skipped scan-lines were blatantly noticeable. Edited October 10, 2019 by Gunstar 1 Quote Link to comment Share on other sites More sharing options...
gozar Posted October 10, 2019 Share Posted October 10, 2019 30 minutes ago, Wrathchild said: I'm pretty sure I've seen a modded PS1 LCD screen connected to an Atari, perhaps at one of the Czech AtariAda's? I have a PS1 LCD that I've used, no modding involved since it has composite input. I also have a 15" LCD TV that has composite/svideo/VGA: Dell has a line of monitors, the 2007FP, that have composite/svideo/vga/DVI: 3 Quote Link to comment Share on other sites More sharing options...
carlsson Posted October 10, 2019 Share Posted October 10, 2019 I've briefly tried some 7" TFT (16:9) from a car DVD system. While those display a composite video signal, they don't have enough vertical resolution to display all lines meaning some pixel lines will be cut off. It might depend on the video source, I believe NTSC works better as it generates fewer lines on the screen but then comes the next problem, that at least the TFT's I've tried don't grok the colour info in NTSC so I end up with a B&W image. Quote Link to comment Share on other sites More sharing options...
doctor_x Posted October 21, 2019 Author Share Posted October 21, 2019 yes gunstar was correct.. im speaking of something like a 7" monitor or similar... great replies regardless though! thanks! Quote Link to comment Share on other sites More sharing options...
+David_P Posted October 22, 2019 Share Posted October 22, 2019 There are 7" screens with a composite input on eBay for pretty reasonable prices. For example, this one. Quote Link to comment Share on other sites More sharing options...
baktra Posted October 22, 2019 Share Posted October 22, 2019 The small screens can be ordered from AliExpress or DX too. The "car" monitors work pretty decently with signal from Atari, however the viewing angles are limited unless you get an IPS screen instead of TFT. In my opinion, it is better to buy a second hand small flat TV with composite input. If you decide for a "car" LCD monitor, I wouldn't recommend anything smaller than 9 inches (my personal experience is that 7" is small). Some of the "car" monitors even have speakers to reduce clutter on your desk. To connect, I use DIN 5 to 4 CINCH cable, also easy to get. Quote Link to comment Share on other sites More sharing options...
andymanone Posted October 22, 2019 Share Posted October 22, 2019 On 10/10/2019 at 2:55 PM, doctor_x said: I've noticed in some user pictures they show themselves using their atari with a very mini sized flatscreen monitor in color. Im guessing this is only possible with something like Lothareks XBXE product. Obviously I can google and have found a ton of things but I was wondering what the general consensus was about the best one to buy? Thanks!!! docx Hi doctor_x, I´m using on my repair desk a small and handy 10 inch "Lenco TFT 1026" for my ATARI´s. It´s an portable TV with build in battery, Native resolution of 1024x600 pix, with separate A/V-Input, HDMI-Input & Antenna. It works perfectly for me ?. Gtx., andY 2 Quote Link to comment Share on other sites More sharing options...
Rybags Posted October 22, 2019 Share Posted October 22, 2019 Caution with some of the smaller LCDs - some have such pathetic resolution that even the Atari's display would suffer. Given that LCDs are generally not the greatest outside their native resolution (or integer multiple or divisor), for the Atari display you'd probably be wanting something with native res of at least 600x400. And of course you don't get a direct pixel mapping, and the Atari display as seen on most TVs in pixel terms is more like about 330x496 (doubling vertical to account for progressive display which leaves blank interlace lines) 1 Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted October 22, 2019 Share Posted October 22, 2019 I'd always opt for a real crt of some sort, bulkier, yes, better display and no LCD lag.. If you love your Atari then give it what it was used to, a real TV / old crt monitor...If you love it enough 2 Quote Link to comment Share on other sites More sharing options...
carlsson Posted October 22, 2019 Share Posted October 22, 2019 Every type of screen has its purpose. For gaming at home, some might prefer a 40-50" or larger TV. For going to expos and you have a car to pack full, sure you can bring your 14-15" CRT or decent LCD screen. If you are travelling light and simply bring an Atari + PSU + some display in a backpack, you want as small screen as possible. If you are going to run multiple systems next to eachother, some mainly for monitoring purposes, those 7-9" TFTs suddenly come handy. Quote Link to comment Share on other sites More sharing options...
pseudografx Posted October 22, 2019 Share Posted October 22, 2019 On 10/10/2019 at 5:44 PM, gozar said: Dell has a line of monitors, the 2007FP, that have composite/svideo/vga/DVI: Unfortunately, I had no luck displaying my PAL Atari 800XE picture on the 2007FP, neither over Composite nor S-Video. Quote Link to comment Share on other sites More sharing options...
gozar Posted October 22, 2019 Share Posted October 22, 2019 8 hours ago, pseudografx said: Unfortunately, I had no luck displaying my PAL Atari 800XE picture on the 2007FP, neither over Composite nor S-Video. I can try mine with a PAL 800XE, but I don't think the Dell monitors support PAL. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.