Colleton Posted October 11, 2019 Share Posted October 11, 2019 Is there a consensus on this yea or nay? I'm going to be installing tf_hh's 48K RAM upgrade on my 400 tomorrow and plan on using an Ultimate Cart with it to play games, so it seems reasonable to me to disable the interlock. Just wanted to see what others think about this before I do it. Quote Link to comment Share on other sites More sharing options...
Rybags Posted October 11, 2019 Share Posted October 11, 2019 The effect is you end up with the same scenario that XL/XE owners have. The OS on those even caters for cart hotswaps - not that I would encourage doing it, I occasionally did so but mainly for copying them. You should be able to do it without modifying the machine, just something to keep the actuating lever down without interfering with the overall mechanism. Quote Link to comment Share on other sites More sharing options...
Gunstar Posted October 11, 2019 Share Posted October 11, 2019 I did this on my 800, assuming the 400 uses the same mechanism, when the lid is closed an arm pushes two contact plates together to complete the circuit. I just used a small zip-tie to hold them together instead. No modification to the computer was needed. 2 Quote Link to comment Share on other sites More sharing options...
gozar Posted October 12, 2019 Share Posted October 12, 2019 On 10/11/2019 at 3:28 AM, Colleton said: Is there a consensus on this yea or nay? I'm going to be installing tf_hh's 48K RAM upgrade on my 400 tomorrow and plan on using an Ultimate Cart with it to play games, so it seems reasonable to me to disable the interlock. Just wanted to see what others think about this before I do it. I solder across the switch, works fine. :-) 1 Quote Link to comment Share on other sites More sharing options...
Colleton Posted October 12, 2019 Author Share Posted October 12, 2019 Thanks everyone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.