WIZZARD77 Posted October 26, 2019 Share Posted October 26, 2019 I just purchased a C128 , 1541 II+, and an s-video cable. When its all hooked up to my upscaler I get vertical scrolling interference bars. The cable does have the resistor installed. I made an 8 pin to Atari 5 Pin adapter and have the interference with that as well. Is there some mod I need to make to fix this problem? I see there is one to get rid of the SID hum, which this also has. Quote Link to comment Share on other sites More sharing options...
WIZZARD77 Posted November 6, 2019 Author Share Posted November 6, 2019 FIXED! Turns out having the power supply plugged into the same power strip as my Atari Jaguar/JagCD was causing all the interference. I moved it to a different outlet and problem sovled. Quote Link to comment Share on other sites More sharing options...
+save2600 Posted November 6, 2019 Share Posted November 6, 2019 Curse of the Jaguar strikes again! ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.