+slx Posted January 12, 2020 Share Posted January 12, 2020 I just found out that my shiny new Rebooteroids cartridge has a BJL loader built in and the equally glossy manual says it can be used to load games via controller port 2. I found some very old stuff on the web how to use BJL with DOS and would like to know if there is a way to work it with modern PCs (or preferably Macs) and if so, what hardware/PC Software is required to do so, Is there anything BJL can do that a Skunkboard can't? Thanks for any help/vectors! 1 Quote Link to comment Share on other sites More sharing options...
+CyranoJ Posted January 12, 2020 Share Posted January 12, 2020 16 minutes ago, slx said: what hardware/PC Software is required to do so. Is there anything BJL can do that a Skunkboard can't? Thanks for any help/vectors! A BJL cable - diagram here. Software here. There is nothing it can do (in respect to loading binaries) that a skunkboard can't. 1 Quote Link to comment Share on other sites More sharing options...
swapd0 Posted January 12, 2020 Share Posted January 12, 2020 Forget BJL if you have a skunkboard, it's slow and you'll have a lot of problems with big files, I never could upload the native demo until I coded a different upload routine. Also it was conected to the parallel port so good luck with a modern PC or a Mac. Get a skunkboard or a JagGD. 1 Quote Link to comment Share on other sites More sharing options...
+slx Posted January 13, 2020 Author Share Posted January 13, 2020 On 1/12/2020 at 3:18 PM, swapd0 said: Get a skunkboard or a JagGD. Have a skunkboard (not yet set up) and ordered a GD but got caught by the shipping hiatus. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.