Kirk Rietveld Posted February 12, 2020 Share Posted February 12, 2020 Hey all, I recently dug out my PEB that I've had for a few years. It had no drives so I put in one from an old Heathkit I had. I used the Diskmanager cart and confirmed that I can format and read disks from the drive. I then went to my Windows 98 machine with a 5 1/4 drive and launched a program called TI99PC and used it to format a new floppy and copy over the contents of a .dsk file. When I put the new disk into the PEB and use the DiskManager cart I can see the catalog of the disk, but when I go into Extended Basic and try 'old 1DSK.QUEST' I get an I/O error. Sometimes the error is 00 or 60. I also can't seem to save a simple basic program with the SAVE command. Is there something I have to do to run the contents of a new disk on the PEB? The contents seem to be there and the floppy seems to be in TI format. What am I missing? Thanks everyone, Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted February 12, 2020 Share Posted February 12, 2020 5 minutes ago, Kirk Rietveld said: old 1DSK.QUEST OLD "DSK1.QUEST" Maybe the quotes are only needed with RUN: RUN "DSK1.QUEST" Quote Link to comment Share on other sites More sharing options...
Fritz442 Posted February 13, 2020 Share Posted February 13, 2020 (edited) Quest and Pennies are game data files for the Tunnels of Doom module. You either need the module or a disk version of TOD, then load those files. Edited February 13, 2020 by Fritz442 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.