oakcitycomics Posted February 17, 2020 Share Posted February 17, 2020 I came across a loose Jaguar console $30 at a thrift store while traveling out of state for work. No carts available and all my stuff is back home. I bridge cart pins 34B and 35B to see if it would power on and it does. However I don't get the Jaguar logo or Red Screen. So my question is with out a cart and bridging these two pins does the Jaguar display anything? Quote Link to comment Share on other sites More sharing options...
+Stephen Moss Posted February 18, 2020 Share Posted February 18, 2020 (edited) I am sure more knowledgeable people like Zerosquare or CyranoJ can provide a definitive answer but personally I would think that without a cart it would fail the checksum which should result in the Red Screen of Death. Edited February 18, 2020 by Stephen Moss Quote Link to comment Share on other sites More sharing options...
dilinger Posted February 18, 2020 Share Posted February 18, 2020 Without a cart, the Jaguar won't turn on (no led, nothing). Quote Link to comment Share on other sites More sharing options...
+CyranoJ Posted February 18, 2020 Share Posted February 18, 2020 8 minutes ago, dilinger said: Without a cart, the Jaguar won't turn on (no led, nothing). One for Zero! I'm not the type to jam random bits of metal in the cart slot 2 Quote Link to comment Share on other sites More sharing options...
oakcitycomics Posted February 18, 2020 Author Share Posted February 18, 2020 6 hours ago, dilinger said: Without a cart, the Jaguar won't turn on (no led, nothing). I bridged 34/35B on the cart port so the system will power on as outlined in a guide by Zerosquare 5 hours ago, CyranoJ said: One for Zero! I'm not the type to jam random bits of metal in the cart slot I bridged the two Pins on the underside of the motherboard. No jamming into the slot lol Quote Link to comment Share on other sites More sharing options...
Gummy Bear Posted February 19, 2020 Share Posted February 19, 2020 On 2/18/2020 at 1:53 PM, oakcitycomics said: I bridged 34/35B on the cart port so the system will power on as outlined in a guide by Zerosquare I bridged the two Pins on the underside of the motherboard. No jamming into the slot lol Try jamming a cartridge into the slot. That's what I do. Works a treat! 1 1 Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted February 26, 2020 Share Posted February 26, 2020 Sorry for the delay, I was in vacation abroad. If you bridge pins 34B and 35B and power on the Jaguar without a cartridge, you should get the red screen of death with the Jaguar logo. If you don't, then there's something wrong with the console, unfortunately. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.