Jump to content

Recommended Posts

The SNUG HRD16 uses the following battery:   ER6C (AA-size) 3,6 Volts Lithium

 

Questions:

- Is this a battery or a rechargeble accu ? (I think it is an accu, and it seems to have 1800 mAh)

- Is it okay to pay about 20 euros for this ?

 

(Maxell:)

IMG_2463.thumb.JPG.743b695880f3c990c47565c573503bc3.JPG

Link to comment
Share on other sites

1 hour ago, Flottmann1 said:

 

yeah this is exactly the one I spotted on ebay :) 

So this is a NON-rechargable one, right ?

The Problem is, the pins will not work perfectly, but maybe I have to fiddle it

 

PS: If battery only, why not taking the one from Reichelt.de in the pic about, for 6,22 eu.

It´s cheaper and has the right pins

 

 

Edited by Schmitzi
  • Like 1
Link to comment
Share on other sites

2 minutes ago, Ksarul said:

Important on these is the voltage (3.6V), one with more power 2,400 mAH vs. 1,800 mAH will just last a little longer. Note: Lithium batteries like these are NOT rechargeable!

 

Can I use a rechargeable one, or does the board not support (charge) it ?

 

 

Link to comment
Share on other sites

On 3/27/2020 at 1:29 AM, Ksarul said:

I don't think that board has a recharge circuit. It was designed for the Lithium batteries, as they last 7-10 years, sometimes longer.

 

Hi Ksarul,

 

sorry for asking again :) but, so it is that way that I can use ANY battery with 3.6 Volts or do I need this special "ER6C" type ?

 

Backgound: The Maxell ER6C comes with 1800 mAh and costs about 20 euros, and there are other ones for 5 euros,

and they have up to 2600 mAh. So they are cheaper, and  should work (save) much more longer ?

 

thx

 

 

Link to comment
Share on other sites

 

Coming from here:

 

the question was:

 

The only .DSK [for the SNUG HRD16] I found in my snug directory is the "ROS8.14-F16". This one ?

And there are some HRD16*.P99-files which I don´t know to handle, and that are not mentioned in the manual.

 

 

 

Edited by Schmitzi
Link to comment
Share on other sites

1 hour ago, Flottmann1 said:

you can copy the p99 with TI-DIR on a emty DSK, look at the PDF at the SNUG Side

 

 

ah ok.

(I searched through the PDFs but I didn´t find "p99" so I just tried it  )

Edited by Schmitzi
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...