bradhig1 Posted April 25, 2020 Share Posted April 25, 2020 after I put buttons with gold contacts in the joystick on one of my 5200 controllers spins around with the top pointing in different directions as it turns. Why is it loose? The joystick on the other controller is fine. Quote Link to comment Share on other sites More sharing options...
bradhig1 Posted April 25, 2020 Author Share Posted April 25, 2020 controller is getting junked. one fire button and the start,pause,reset buttons don't work anyone. I think something shorted. Quote Link to comment Share on other sites More sharing options...
Charlie_ Posted April 25, 2020 Share Posted April 25, 2020 9 hours ago, bradhig1 said: controller is getting junked. one fire button and the start,pause,reset buttons don't work anyone. I think something shorted. Make sure the flex circuit is firmly in the connector for the wire. I had one acting funny the other day. All I had to do was give it a firm press down into the connector. Also, unfortunately, the wires on these 5200 controllers develop breaks over time. I think they used solid strand wire instead of braided. So flop the cable to different positions and try the controller. You might find it works sometimes. Could be a broken wire. If the stick shaft is in the cup within the controller perhaps the shaft is bent? Quote Link to comment Share on other sites More sharing options...
bradhig1 Posted April 25, 2020 Author Share Posted April 25, 2020 I opened it up again. Can't see anything wrong. Quote Link to comment Share on other sites More sharing options...
zylon Posted April 25, 2020 Share Posted April 25, 2020 make sure none of the connectors on the pots are making contact with the unused terminals Quote Link to comment Share on other sites More sharing options...
bradhig1 Posted April 25, 2020 Author Share Posted April 25, 2020 It might just need a new mylar circuit. The fire button is working again. Quote Link to comment Share on other sites More sharing options...
bradhig1 Posted May 1, 2020 Author Share Posted May 1, 2020 I put a new mylar flex circuit in the joystick and it works fine now. handle is still spinning around ,but I think something in the handle is broken and that can't be fixed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.