timdu Posted April 28, 2020 Share Posted April 28, 2020 (edited) A few years ago I obtained a number of new PCBs to make Odyssey2 games from ozyr at packrat. These boards were created and made by Rene van den Ended in Holland. Price: $2 each ( plus shipping ) I will provide a shipping quote From Rene (note this is for 27C256 EPROMs, he did note that others could be used, but you’d have to ask him how to use them — I’ve always used 27C25 (originally ST, but then AT, and I always use OTP [write once only]), and have had very good luck with them — aka, minimum failures, like 1 in 500 chips) EPROM NOT INCLUDED Will include the additional programming and soldering steps with the purchase [ ORIGINAL PICTURES REMOVED AS PER THEY WERE PROPERTY OF OZYR ] Here is a picture of 2 boards ... so each of the 2 sides , the solder side and the component side , can be seen Edited April 29, 2020 by timdu Quote Link to comment Share on other sites More sharing options...
ozyr Posted April 29, 2020 Share Posted April 29, 2020 Nice pictures, as they are mine. Thanks for asking to use them!? Quote Link to comment Share on other sites More sharing options...
timdu Posted April 29, 2020 Author Share Posted April 29, 2020 Sorry about that. I should have asked you. I removed them from the first post and I put up a picture of the boards that I took with my camera just now. If you know of any one who is looking for any of these, please let me know. Quote Link to comment Share on other sites More sharing options...
ozyr Posted April 29, 2020 Share Posted April 29, 2020 Thanks for that. And honesty, curious as to how many you have. The lot I sold you a while ago left me with little, and I might need some this year. Quote Link to comment Share on other sites More sharing options...
+5-11under Posted April 30, 2020 Share Posted April 30, 2020 Are these boards better than "ahem" newer versions? Quote Link to comment Share on other sites More sharing options...
pedalpowered Posted January 29, 2021 Share Posted January 29, 2021 I'm confused by this post. What are the "newer" versions? I recall that you made an O2 ROM PCB. I don't see that in your project links in your sig, tho. Quote Link to comment Share on other sites More sharing options...
+5-11under Posted January 29, 2021 Share Posted January 29, 2021 24 minutes ago, pedalpowered said: I'm confused by this post. What are the "newer" versions? I recall that you made an O2 ROM PCB. I don't see that in your project links in your sig, tho. Are you replying to me? If yes, I've got reprogrammable boards available, if you need a bunch. Edit: this is timdu's thread, though. Contact him for the boards shown in his first post. They're more DIY, but potentially cheaper, too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.