Alaskaman Posted May 12, 2020 Share Posted May 12, 2020 Does anyone have information on the memory expansion installed on my Atari 520ST. The PCB is labeled 1987 V.2 AERCO easiest Solderless Ram. The PCB is halfway populated with KM41C1000AP Chips. I would like to fully populate the board and was looking for information. Thanks, Quote Link to comment Share on other sites More sharing options...
Colleton Posted May 13, 2020 Share Posted May 13, 2020 Other people have posted asbout this board in the past, you might ask Guitarman if he ever found any documentation: Quote Link to comment Share on other sites More sharing options...
ParanoidLittleMan Posted May 13, 2020 Share Posted May 13, 2020 Without docs may say: expansion is with 18 pin sockets, so for 1 Mbit DRAM chips with 1 bit data. When populate all sockets - so remaining 16 with compatible chips will have max RAM - 4 MB. But in that case must remove/deactivate existing original 512 KB RAM from mainboard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.