Omega-TI Posted June 1, 2020 Share Posted June 1, 2020 I found a nice little VGA/HDMI monitor that would go PERFECT with my portable TI setup! The problem is, I need another monitor like I need another hole in my head. If it were not for the price, I might have considered clicking on it! << MONITOR HERE >> Quote Link to comment Share on other sites More sharing options...
dgrissom Posted June 2, 2020 Share Posted June 2, 2020 This topic is the story of my life! Cool looking monitor! 2 Quote Link to comment Share on other sites More sharing options...
+save2600 Posted June 2, 2020 Share Posted June 2, 2020 The one above seems pricey at $115... I picked up a 9" monitor with a tilt stand, speakers built in, HDMI, VGA and composite for about $55 shipped on eBay. Domestic sale even. https://www.ebay.com/itm/9-LCD-CCTV-Monitor-PC-Screen-AV-RCA-VGA-HDMI-w-Speak-for-DSLR-Raspberry-Pi-US/401966835088?hash=item5d97172590:g:ecgAAOSw5VFWLE2G 3 Quote Link to comment Share on other sites More sharing options...
jrhodes Posted June 2, 2020 Share Posted June 2, 2020 A full PEB setup. I really want one, just for the sake of saying i own one. But i really don't need it. Heck, if someone ever manages to merge speech + sams + tipi into a single sideport device, i'd even sell my 32k+tipi setup, in favor of a single board that does all i could ask for. The only thing better then that, would be for someone to make a sideport plug-and-play VDP/F18A replacement. 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted June 3, 2020 Author Share Posted June 3, 2020 1 hour ago, jrhodes said: A full PEB setup. I really want one, just for the sake of saying i own one. But i really don't need it. You're probably right. A full P-Box setup can be over rated if you don't want or need to run a bunch of legacy hardware or run little used software that requires more than the 32K, for which there is very little available (so far). Lately I've been playing more with my portable 32K/TIPI sidecar than with my main unit. I'm finding it does 95% of what I do on the main box anyway. And it's easier to move around! ? 1 Quote Link to comment Share on other sites More sharing options...
aftyde Posted June 3, 2020 Share Posted June 3, 2020 That is a cute monitor... I've had my finger hovering over the bid button on that Triple Tech card. Which I absolutely do not need. Right now; In the console F18 MiniMem In the PEB Firehose 32K Memory P-Gram+ WHT SCSI card w Syquest 200MB cart drive in external box WDS1. SID Player card RS-232 card w HDX mod installed - modem, HDX1. TIPI card with Raspberrry PI mounted. Myarc DDCC w 80 track mod - DSDD/2880 sectors. DSK1 and 2 are Lotharek SD card floppy emulators, DSK3. (DSSD) shares the external box with the 1/2 height Syquest. Full house ... and I use it every day... Thanks to @jedimatt42 I now have more or less unlimited high speed database storage. As a kid, if I had such a system - there would be a LOT more TI software in the world today. Cheers, Arthur... 6 Quote Link to comment Share on other sites More sharing options...
digdugnate Posted June 5, 2020 Share Posted June 5, 2020 P-Code card or an MBX. Quote Link to comment Share on other sites More sharing options...
GDMike Posted June 5, 2020 Share Posted June 5, 2020 (edited) On 6/2/2020 at 6:09 PM, jrhodes said: A full PEB setup. I really want one, just for the sake of saying i own one. But i really don't need it. This is why I missed selling out my super sketch when I couldn't afford to keep it. luckily for me I'm getting it back. And because I was able to get it working when it wasn't, makes it even nicer than before. Edited June 5, 2020 by GDMike 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted June 6, 2020 Author Share Posted June 6, 2020 On 6/2/2020 at 7:07 AM, save2600 said: I picked up a 9" monitor with a tilt stand, speakers built in, HDMI, VGA and composite for about $55 shipped on eBay. Domestic sale even. https://www.ebay.com/itm/9-LCD-CCTV-Monitor-PC-Screen-AV-RCA-VGA-HDMI-w-Speak-for-DSLR-Raspberry-Pi-US/401966835088?hash=item5d97172590:g:ecgAAOSw5VFWLE2G Actually that IS a pretty good price, especially since it comes with all the cables! The seller even accepts offers, I wonder how low will they go? Quote Link to comment Share on other sites More sharing options...
+hloberg Posted June 9, 2020 Share Posted June 9, 2020 I would say a geneve. no way to get it so of course I want it. 2 Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted June 9, 2020 Share Posted June 9, 2020 I have been agonizing over which storage solution I need. I already have a 1MB RAMDISK which works great, but I always worry about losing programs if/when the backup batteries die, and I wanted a more permanent option. I do have an RS232 HDX card and that works, but I don't really want to have my TI tied down to my laptop all the time. In the end, it boiled down to 2 currently available options: the new run of IDE cards and the TIPI-PEB. After much deliberation, I have settled on the TIPI because it provides additional cool capabilities (internet, mouse etc...) on top of nearly unlimited storage whereas the IDE card is strictly storage. Having both a TIPI and an IDE card made little sense even though every fiber in my body is itching to get one anyway. I must resist! There is of course Ralph's SD-based solution on the horizon, but I'll cross that bridge when it is finalized... 3 1 Quote Link to comment Share on other sites More sharing options...
GDMike Posted June 9, 2020 Share Posted June 9, 2020 Mmmmmm....tipi... one day it may happen for me too. Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted June 10, 2020 Author Share Posted June 10, 2020 12 hours ago, Vorticon said: I have been agonizing over which storage solution I need. I already have a 1MB RAMDISK which works great, but I always worry about losing programs if/when the backup batteries die, and I wanted a more permanent option. I do have an RS232 HDX card and that works, but I don't really want to have my TI tied down to my laptop all the time. In the end, it boiled down to 2 currently available options: the new run of IDE cards and the TIPI-PEB. After much deliberation, I have settled on the TIPI because it provides additional cool capabilities (internet, mouse etc...) on top of nearly unlimited storage whereas the IDE card is strictly storage. Having both a TIPI and an IDE card made little sense even though every fiber in my body is itching to get one anyway. I must resist! There is of course Ralph's SD-based solution on the horizon, but I'll cross that bridge when it is finalized... I had not planned on posting the link to the my video twice, but your post kinda spoke to me... 3 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted July 15, 2020 Author Share Posted July 15, 2020 One thing I really like about the brilliant design of the TIPI/32K sidecar is the super easy access to the SD card, especially with the recent upgrade situation. On my P-Box TIPI, I've never had to remove the micro SD card until now, but man, I'm not looking forward to it. With that in mind, I've been toying around with getting one of those SD card extenders for around 6 months now, so I figured it was time to finally press CLICK, because pulling the card on the P-Box version is a tedious chore at best. So, I was finally able to justify it! ? Quote Link to comment Share on other sites More sharing options...
RXB Posted July 17, 2020 Share Posted July 17, 2020 On 6/2/2020 at 5:42 PM, Omega-TI said: You're probably right. A full P-Box setup can be over rated if you don't want or need to run a bunch of legacy hardware or run little used software that requires more than the 32K, for which there is very little available (so far). Lately I've been playing more with my portable 32K/TIPI sidecar than with my main unit. I'm finding it does 95% of what I do on the main box anyway. And it's easier to move around! ? Yea can not do GRAM on TIPI or FinalGROM so have to stick with Pbox or Classic99 for moment. (Mess can do it too, but much more work then Classic99) Quote Link to comment Share on other sites More sharing options...
Badaboom Posted July 17, 2020 Share Posted July 17, 2020 A PeB… But I don't really need it with my 32k+TiPi+FG99. I'd like to get my hand on one of those sidecar floppy drive just for the kick of having a FDD for each of my retro system, but I can manage with the TiPi and the cassette tape for the time being. Quote Link to comment Share on other sites More sharing options...
HOME AUTOMATION Posted July 17, 2020 Share Posted July 17, 2020 2 hours ago, RXB said: can not do GRAM on TIPI or FinalGROM so have to stick with Pbox or Classic99 for moment. FinalGROM, should do GRAM! ...Though, perhaps w/o the features of some other devices. "In GRAM Mode, all occupied GROM banks will be GRAM banks. GPL doesn't support GRAM except for theMOVE instruction, so move 10, g@data, g@>7800 and alike would be the only way to write to GRAM." https://endlos99.github.io/finalgrom99/ Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted July 17, 2020 Author Share Posted July 17, 2020 1 hour ago, Badaboom said: A PeB… But I don't really need it with my 32k+TiPi+FG99. One really nice thing about the TI-99/4A with the TIPI/32K and the FG99 is it's portability! You can take it with you on vacation! So after you get done doing all your other fun things during the day, you can settle in during the evening and have even more fun! 1 Quote Link to comment Share on other sites More sharing options...
RXB Posted July 17, 2020 Share Posted July 17, 2020 4 hours ago, HOME AUTOMATION said: FinalGROM, should do GRAM! ...Though, perhaps w/o the features of some other devices. "In GRAM Mode, all occupied GROM banks will be GRAM banks. GPL doesn't support GRAM except for theMOVE instruction, so move 10, g@data, g@>7800 and alike would be the only way to write to GRAM." https://endlos99.github.io/finalgrom99/ I should explain, I write with the Ryte Data GPL Assembler and load with the GPL Object loader that loads Compressed GPL Object code. I do not think you could move GPL Object code into GRAM on FinalGROM with any easy to use way. MOVE 10,G@DATA,G@>7800 Has no value, would be much better off using GRAM device like GRAMULATOR or GRAM KRACKER or PGRAM or Classic99 or MESS. The one I have found the easiest to use is Classic99 from REA or even EA cart. Though you can use FW to run GPL Object Code Loader from FW and this is running from XB in GRAM. Also you can use Mini Memory instead or TI Writer so any GRAM cart with normal GPL access would work. I am interested in writing for FinalGROM though and plan to make some GPL for it. 1 Quote Link to comment Share on other sites More sharing options...
jonecool Posted July 19, 2020 Share Posted July 19, 2020 On 6/1/2020 at 5:35 PM, Omega-TI said: I found a nice little VGA/HDMI monitor that would go PERFECT with my portable TI setup! The problem is, I need another monitor like I need another hole in my head. If it were not for the price, I might have considered clicking on it! << MONITOR HERE >> That is a nice looking monitor, but my old eyes need something a little larger as well as portable. Not cheaper, however. Though, I did get this one for a review I do love it and use it in all my videos (TI & Raspberry Pi-related). I did buy the John Will 15.6" touch screen monitor before this one, but use the Auzai monitor more (no touch-screen). It's much thinner and the display looks beautiful. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.