leech #1 Posted July 25, 2020 So, I would like to at least figure out why my original UltraSatan stopped working. It powers on, flashes the red lights as if it has detected the SD cards, and then... nothing, any system I connect it to fails to recognize it is there. I bought a USBasp to flash it, but all I get from Jookie's tool is that it can't start the communication. It asks to specify an LPT address, but from what have been seeing, Win10 has killed LPT support... maybe it is time to see if I still have Win 7 on one of those thinkpads... Anyhow, I will amuse you all with my other project. 20200725_171350.mp4 Quote Share this post Link to post Share on other sites
snarkdluG #2 Posted July 26, 2020 (edited) Maybe the filesystem on the SD got corrupted? Checked it on the PC? Edited July 26, 2020 by snarkdluG Quote Share this post Link to post Share on other sites
ParanoidLittleMan #3 Posted July 26, 2020 I had such problem, and it needed flashing. SD card is not needed for that. Ah, and W10 s* 🙂 Quote Share this post Link to post Share on other sites
leech #4 Posted July 26, 2020 58 minutes ago, ParanoidLittleMan said: I had such problem, and it needed flashing. SD card is not needed for that. Ah, and W10 s* 🙂 Yeah, definitely not the sd card. You happen to have the model of flasher you used to do it? I got a usbasp, but it doesn't eant to connect, from what I can tell, with Jookie's tool. Quote Share this post Link to post Share on other sites
ParanoidLittleMan #5 Posted July 26, 2020 I sent it to Lotharek, and he did it. Quote Share this post Link to post Share on other sites
leech #6 Posted July 26, 2020 4 minutes ago, ParanoidLittleMan said: I sent it to Lotharek, and he did it. D'oh! That was the one thing I was trying to avoid. Granted I should have done that when I had the issue initially, instead of buying a second one. 😛 Quote Share this post Link to post Share on other sites
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord