kevincondrick@gmail.com Posted August 17, 2020 Share Posted August 17, 2020 (edited) Ok so I just got a 3do off line and we'll it turns on but beeps. Is there anyone who knows what this means/ how you can fix it if possible? I know on PC's they will do something like this if the memory isn't instead correctly... Could this be the case here ? VID_20200816_221331.mp4 VID_20200816_221331.mp4 VID_20200816_221047.mp4 Edited August 17, 2020 by kevincondrick@gmail.com Quote Link to comment Share on other sites More sharing options...
kevincondrick@gmail.com Posted August 18, 2020 Author Share Posted August 18, 2020 Good new/ bad news I found that afew vias eaten away I managed to fix them only to find that the console will turn on but shortly after fails again. I suspect that the ic400 chip was bad so I tested it wile power on and m...mm I believe now I blown the video incoder chip.. bt9101 chip. .. so I'm in a pinch now Quote Link to comment Share on other sites More sharing options...
kevincondrick@gmail.com Posted September 9, 2020 Author Share Posted September 9, 2020 Well I did end up finding a replacement for bt9101chip. I replaced it with a bt858 and it worked so I'm assuming that they are inner changeable. For the beeping however I did suspect the s-ram chip I found that there some traces missing around it. I then repaired them and it seamed to fix the problem. So there for if anyone else has this problem I wold start by looking there 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.