cypher007 Posted October 2, 2020 Share Posted October 2, 2020 (edited) planing on finally getting round to fitting a UAV board and recapping my light sixer PAL revB. i then notice this static mod so was looking into it but cant find any values or type info for the components. i would probably just buy the kit but im in UK and would be alot easier to order the parts from UK. Edited October 2, 2020 by cypher007 Quote Link to comment Share on other sites More sharing options...
djsky717 Posted October 3, 2020 Share Posted October 3, 2020 To protect the console's HEX Buffer chip from static discharge from the trigger button use of the joystick, the anti-static mod needs to be performed on C236 and C237 using an axial capacitor of a 0.1uF value with a zener diode for each controller port. The Service Bulletin listed this mod as CA018263. Hope this helps. Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted October 3, 2020 Share Posted October 3, 2020 Here are the relevant pages from the Atari Field Service Manual: Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.