+davidcalgary29 Posted October 25, 2020 Share Posted October 25, 2020 I've just received my cased (of course, as I thought I'd be flexible) ultrasatan...and found out that the male DB19 connection won't fit flush with the Mega STe case because of the VME port. I bought this when I should have bought something like this. I don't see anything on the Lotharek website -- does anyone sell a flat DB19 male/IDC 20 cable anymore? Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted October 25, 2020 Share Posted October 25, 2020 (edited) The link you have does indeed show the cable without warnings, but I thought I had seen something different on Lothereks site See this link https://lotharek.pl/productdetail.php?id=112 It shows the issue you have, I got to this by looking at the Ultrasatan then the link on that page to the cable gets here I think he must have 2 different pages for the same item, not much consolation for you Edited October 25, 2020 by TGB1718 1 Quote Link to comment Share on other sites More sharing options...
snarkdluG Posted October 25, 2020 Share Posted October 25, 2020 Yup. Just put some thick tape on it. Perhaps a piece of cardboard first. Otherwise ask Olivier if his cable can be unplugged in one end and used in the UltraSatan. http://gossuin.be/index.php/shop#ATARI Quote Link to comment Share on other sites More sharing options...
+davidcalgary29 Posted October 25, 2020 Author Share Posted October 25, 2020 Well, crap -- it might be too late for that. The computer doesn't recognize the UltraSatan on startup, although the light is on. Could I have fried it? Quote Link to comment Share on other sites More sharing options...
MasterMotorola Posted October 25, 2020 Share Posted October 25, 2020 David, take a look at this thread and scroll about half way down to Marsupilami's post with photos of what I think is the same cable problem you are having. 1 Quote Link to comment Share on other sites More sharing options...
+davidcalgary29 Posted October 25, 2020 Author Share Posted October 25, 2020 Okay -- wow. Electrical tape it is! I'll go back to my setup next weekend after I return home. Quote Link to comment Share on other sites More sharing options...
+davidcalgary29 Posted October 26, 2020 Author Share Posted October 26, 2020 Tried once more with the electrical tape, and bingo! Thanks for the advice! 1 1 Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted October 26, 2020 Share Posted October 26, 2020 Whew, what a relief 1 Quote Link to comment Share on other sites More sharing options...
Marsupilami Posted December 2, 2020 Share Posted December 2, 2020 On 10/26/2020 at 5:18 AM, davidcalgary29 said: Tried once more with the electrical tape, and bingo! Thanks for the advice! Scary isn't it ? You can also buy this adapter instead : https://lotharek.pl/productdetail.php?id=309 Quote Link to comment Share on other sites More sharing options...
Bikerbob Posted December 9, 2020 Share Posted December 9, 2020 On 10/25/2020 at 5:53 PM, snarkdluG said: Yup. Just put some thick tape on it. Perhaps a piece of cardboard first. Otherwise ask Olivier if his cable can be unplugged in one end and used in the UltraSatan. http://gossuin.be/index.php/shop#ATARI Wow, Olivier gets more and more stuff on his site, and his prices are fantastic. I support him through several purchases, and now I see some more stuff that would be great.. but I see that low cost cable at 8 euro.. deal. James 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.