hueyjones70 Posted November 3, 2020 Share Posted November 3, 2020 I have a 600XL that screen objects will not respond to an UP movement from JOYSTICK #2. I have tried multiple joysticks. The objects will move left, right, and down. Quote Link to comment Share on other sites More sharing options...
hueyjones70 Posted November 3, 2020 Author Share Posted November 3, 2020 I have touched up the solder joints for the joystick pins, checked the pins and they are all present and none are bent. Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted November 3, 2020 Share Posted November 3, 2020 Is the PIA chip socketed, if it is, maybe carefully remove and refit, might be corrosion on the pins 1 Quote Link to comment Share on other sites More sharing options...
hueyjones70 Posted November 6, 2020 Author Share Posted November 6, 2020 I removed, checked, and reinserted the PIA and nothing changed so I replaced the PIA and that solved the problem. 1 1 Quote Link to comment Share on other sites More sharing options...
hueyjones70 Posted November 8, 2020 Author Share Posted November 8, 2020 Maybe it isn't unusual for 1 pin out of 40 to stop working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.