Jump to content
IGNORED

#FujiNet Firmware Update Information (please do not reply)


mozzwald

Recommended Posts

This thread will get posts when a new firmware update is available from https://fujinet.online/download so that you may subscribe and get notifications if you wish. Please keep replies to a minimum (none is preferable) as to not overload notifications to those subscribing. You can use the other appropriate threads for questions relating to firmware/hardware/troubleshooting/etc.

 

A new firmware update is available at https://fujinet.online/download

 

Notable new features:

  • Ability to save application configuration information on SD card (Device $70, SIO commands $DB-$DE) for use by developers writing new Atari applications. Used by the latest weather app from @bocianu
  • Modem Sniffer 
  • Like 5
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.ce7a9391
Version Date/Time: 2020-11-14 01:43:21
Build Date/Time: Sat Nov 14 02:43:44 UTC 2020

New features:

  • Ability for device slots to have their read/write modes toggled in CONFIG (R and W keys)
  • MOUNT and BOOT in CONFIG now unmounts CONFIG from D1:
  • Can now press OPTION or B to boot from CONFIG

Bug Fixes

  • CONFIG no longer tries to mount and EMPTY host slot if selected
  • Modem sniffer turned off by default
  • Fix MAC address display to show leading zeros

New FujiNet SIO Commands ($70):

$DA - Get Device Slot Filename
https://github.com/FujiNetWIFI/fujinet-platformio/wiki/SIO-Command-$DA-Get-Device-Slot-Filename

$D9 - Toggle CONFIG disk on/off in D1:
https://github.com/FujiNetWIFI/fujinet-platformio/wiki/SIO-Command-%24D9-Enable-Disable-CONFIG-in-D1

 

  • Like 1
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.52c0a446
Version Date/Time: 2020-11-15 18:26:23
Build Date/Time: Sun Nov 15 18:50:57 UTC 2020

New Features:

  • R: / Modem telnet support
    • ATNET1 command to enable telnet
    • AT+TERM=<DUMB,VT52,VT100,ANSI> command to set term type
    • IceT XE telnet to a linux box, running 'htop':
      icetxe_htop.thumb.jpg.5c1eeeabcdaff0af6188604d27fb09da.jpg
  • Option to disable CONFIG boot disk from web interface (for SDX users)
    • diable-config.png.da56e84f506f4b10f2debed1cde839f2.png
  • Like 4
Link to comment
Share on other sites

Please heed @mozzwald's request and stop posting in this thread. There are likely dozens if not hundred of people with this thread on Notification so we don't miss update notices. 

 

Perhaps @Albert or another moderator could lock it to all except mozzwald's notifications? 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

A new firmware update is available at https://fujinet.online/download

 

FujiNet Version: 0.5.d7586b80
Version Date/Time: 2020-12-05 20:18:46
Build Date/Time: Mon Dec 7 04:28:35 UTC 2020

Notable Bits:

  • Additional fonts for Epson printer emulation & other various printer fixes
  • fixes for cassette emulation
  • tcp/ip tweaks for better modem emulation. ATASCII BBSs now work, but can freeze up (still investigating)
  • Increase RAM to fix some ATX loading issues
  • Like 4
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.8d1a6210
Version Date/Time: 2020-12-14 03:53:18
Build Date/Time: Mon Dec 14 18:29:19 UTC 2020

Memorable changes:

* Altirra based ATASCII BBSs now work thanks to @JohnPolka

* Cassette images can now be mounted to slot 8 in config. Selection of a CAS file automagically puts it in D8

  • Like 5
  • Thanks 1
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.8edf468d
Version Date/Time: 2020-12-19 04:49:28
Build Date/Time: Sat Dec 19 05:48:26 UTC 2020

Fanciful Fixes:

* BIG BUGFIX: double density disks (ATR) now calculate correct sector offset
* Modem: auto-answer can now happen during status
* Modem: add RAUTOANS tool to enable/disable auto answer
* Modem: Type 1 poll changed to 16 tries, from 26, handler loading now reliably works.
* Modem: Backspacing too far no longer crashes modem in command mode (@mleair)
* Modem: CRX now updated when somebody connects

  • Like 1
Link to comment
Share on other sites

10 hours ago, mozzwald said:

A new firmware update is available at https://fujinet.online/download


FujiNet Version: 0.5.8edf468d
Version Date/Time: 2020-12-19 04:49:28
Build Date/Time: Sat Dec 19 05:48:26 UTC 2020

Fanciful Fixes:

* BIG BUGFIX: double density disks (ATR) now calculate correct sector offset
* Modem: auto-answer can now happen during status
* Modem: add RAUTOANS tool to enable/disable auto answer
* Modem: Type 1 poll changed to 16 tries, from 26, handler loading now reliably works.
* Modem: Backspacing too far no longer crashes modem in command mode (@mleair)
* Modem: CRX now updated when somebody connects

I updated my FujiNet today. Unfortunately it does not work. With version before I could start it from SpartaDOS X - of course, with no success, but after that went back to the SDX command line.

Now ATARI freezes, just Reset can restart it.

 

Still I am waiting for extending of characters to the special, like | . I saw C code modification day, after I reported this issue a month ago,

but this correction is still not in updates (at least in 2 next after my report). Again: If my password includes | character it works like

EOL or some text separator in the password. Characters after this are interpreted like file name ... Please, correct this character issue. To change

password in my home's network system is a big issue for its complexity and number of attached equipment on wifi ... So, the only way to extend 

the character-set accepted by the password on FujiNet.

 

Thanks you,

Peter

Link to comment
Share on other sites

2 hours ago, KPeter said:

Still I am waiting for extending of characters to the special, like | .

 

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.8edf468d
Version Date/Time: 2020-12-19 04:49:28
Build Date/Time: Sat Dec 19 19:09:59 UTC 2020

The only change is to FujiNet CONFIG:

 * increase inputtable characters again because some people have ~ and | and { }

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.8edf468d
Version Date/Time: 2020-12-19 04:49:28
Build Date/Time: Sat Dec 26 23:37:44 UTC 2020

Unbelievable Upgrades:

 * Host & Disk slots shown in Web admin page

 * Disable WiFi Power Saving for better latency

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 4
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.fe08a639
Version Date/Time: 2020-12-27 21:07:58
Build Date/Time: Sun Dec 27 21:27:27 UTC 2020

Fancy New Features:

 * Can now skip WiFi setup in CONFIG
 * Disengage CONFIG disk if READ happens before STATUS is completed (meaning something else has responded to D1:)

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

Link to comment
Share on other sites

  • 3 weeks later...

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.e09997c5
Version Date/Time: 2021-01-16 02:23:59
Build Date/Time: Sat Jan 16 23:27:52 UTC 2021

New Stuff For You:

* Web UI: now shows working path & filename for mounts

* Web UI: new rewind button for CAS files. After CSAVE you can rewind cassette to the beginning for playback

* Modem bugfix: increase delay for loading handler

* SIO2BT: state is saved in config file. If BT is enabled it will startup in SIO2BT mode (Feature request by @MrFSL)

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 2
  • Thanks 2
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.bec03534
Version Date/Time: 2021-01-18 22:12:42
Build Date/Time: Tue Jan 19 19:12:09 UTC 2021

Extravagant Enhancements:

* N: Firmware rewrite now merged in (FTP not working yet). Thanks @tschak909!
* CP/M support, more info here: https://github.com/FujiNetWIFI/fujinet-platformio/wiki/CP-M-Support Thanks @tschak909!
* Added phonebook support to the MODEM. Phonebook saved to config file. Thanks @manterola!

* Key clicks disabled in CONFIG

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 5
  • Thanks 2
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.7d4cf107
Version Date/Time: 2021-01-21 23:30:55
Build Date/Time: Fri Jan 22 00:43:13 UTC 2021

Fabulous Features:

* Added SIO set PROCEED timer rate command to N:
* Removed debugger from CPM
* Started adding BDOS CP/M commands for N:
* CPM I/O speed improvements

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.e6b3e94e
Version Date/Time: 2021-01-22 01:42:35
Build Date/Time: Mon Jan 25 02:25:21 UTC 2021

Crazy Config Changes:

* Once you have saved your Wifi credentials, CONFIG will skip the first scan/connect at startup. (ESP32 will automatically connect during bootup)

* If Wifi is not connected when CONFIG starts, it will attempt to connect to the saved AP and re-scan if it cannot connect

* Selector bar is now green or red. Green means Wifi connected, Red is not connected

* If you are not connected to Wifi and you choose a TNFS server in the host list you are taken to the Wifi scan screen

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

Link to comment
Share on other sites

  • 2 weeks later...

A new firmware update is available at https://fujinet.online/download

 

Unimaginable Upgrades:

* By popular demand, Config can now copy files from one host slot to another

fnCopy.thumb.png.75beb513419c95fd8aa178f405b81e8e.png

* Bluetooth Device name, baudrate and enable at boot options added to fnConfig.ini

* Atari COMMAND assertion will break FujiNet out of MIDIMaze mode if active

* SDMMC to SDSPI fixes for latest Espressif IDF/PlatformIO updates

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 2
  • Thanks 2
Link to comment
Share on other sites

  • 2 weeks later...

A new firmware update is available at https://fujinet.online/download

FujiNet Version: 0.5.fa579e3f
Version Date/Time: 2021-02-13 19:34:11
Build Date/Time: Sun Feb 21 00:49:34 UTC 2021

Distinguished Developments:

 * UART2 FIFO Fix so soft RESET works properly
 * Aggressive memory leak fixes for TCP
 * BBS support for CP/M (BDOS functions to support BYE.COM in fujinet-cpm-tools)
 * Tons of N: HTTP work.
 * Set MODEM default baud rate to 300 baud
 * Lots of little Modem bugs squashed.
 * update AT? (AT help) command for MODEM
 * MODEM STATUS changes so FoReM 850 can operate

 

Please do not respond to this thread. If you have an issue, start a new post in the FujiNet subforum, open an issue on the github tracker or ask for assistance in Discord chat.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...