Slow In Booting Up

[Crc_Error]

I have noticed that over time my Fuji is getting progressively slower in booting up stuff I have in Slot 1.  It takes up to 15 seconds even before it starts loading stuff.  I am using an unmodded 800XL.  Is this issue others are having too?  I just upgraded the firmware tonight to the latest version.  Just a concern otherwise a wicked product for our vintage A8's.  Happy New Year to all!

[tschak909]

Can you please run the FujiNet flasher, press the debug monitor button, and capture the log for a boot?

-Thom

 

[Crc_Error]

Here is my logs when I boot up.  

 

Using 'COM4' as serial port.
Showing logs:
[00:44:26]
[00:44:26]CF: 31 53 00 00 84
[00:44:26]FujiNet CONFIG boot
[00:44:26]disk sio_process()
[00:44:26]ignoring status command
[00:44:26]
[00:44:26]CF: 31 53 00 00 84
[00:44:26]FujiNet CONFIG boot
[00:44:26]disk sio_process()
[00:44:26]ignoring status command
[00:44:26]
[00:44:26]CF: 31 53 00 00 84
[00:44:26]FujiNet CONFIG boot
[00:44:26]disk sio_process()
[00:44:26]ignoring status command
[00:44:26]
[00:44:26]CF: 31 53 00 00 84
[00:44:26]FujiNet CONFIG boot
[00:44:26]disk sio_process()
[00:44:26]ignoring status command
[00:44:26]
[00:44:26]CF: 31 53 00 00 84
[00:44:27]FujiNet CONFIG boot
[00:44:27]disk sio_process()
[00:44:27]ignoring status command
[00:44:27]
[00:44:27]CF: 31 53 00 00 84
[00:44:27]FujiNet CONFIG boot
[00:44:27]disk sio_process()
[00:44:27]ACK!
[00:44:27]disk STATUS
[00:44:27]response: 0x00, 0xff, 0xfe
[00:44:27]->SIO write 4 bytes
[00:44:27]COMPLETE!
[00:44:27]
[00:44:27]CF: 31 52 01 00 84
[00:44:27]FujiNet CONFIG boot
[00:44:27]disk sio_process()
[00:44:27]ACK!
[00:44:27]ATR READ
[00:44:27]->SIO write 128 bytes
[00:44:27]COMPLETE!

 

 

This goes on for quite a while and computer sometimes goes into self test mode. 
 

Edited January 1, 2021 by Crc_Error

[Crc_Error]

Log from flashing.  Hope it describes anything I might have an issue with.

 

 

Using 'COM4' as serial port. Writing at 0x0012c000... (100 %)Wrote 2021968 bytes (1171162 compressed) at 0x00010000 in 27.1 seconds (effective 596.2 kbit/s)... Writing at 0x00ca8000... (100 %)Wrote 2097152 bytes (637267 compressed) at 0x00c10000 in 15.0 seconds (effective 1122.1 kbit/s)...
Hash of data verified.

Leaving...
Hard Resetting...
Done! Flashing is complete!

Showing logs:
[01:08:02][01:08:02]
[01:08:02]--~--~--~--
[01:08:02]FujiNet 0.5.89f318f9 2020-12-29 01:50:02 Started @ 3
[01:08:02]Starting heap: 4053896
[01:08:02]PsramSize 3932108
[01:08:02]himem phys 4456448
[01:08:02]himem free 4456448
[01:08:02]himem reserved 262144
[01:08:02]FujiNet Hardware v1.0
[01:08:02]SPIFFS mounted.
[01:08:02]E (1117) sdmmc_sd: sdmmc_enable_hs_mode_and_check: select_card (1) returned 0x106
[01:08:02]SD mounted.
[01:08:02]fnConfig::load
[01:08:02]Found copy of config file on SD - copying that to SPIFFS
[01:08:02]copy_file "/fnconfig.ini" -> "/fnconfig.ini"
[01:08:02]copy_file copied 908 bytes
[01:08:02]fnConfig::load read 908 bytes from config file
[01:08:02]WIFI_EVENT_STA_START
[01:08:02]WiFi connect attempt to SSID "Lira 2 2.4Ghz"
[01:08:02]esp_wifi_connect returned 0
[01:08:03]disk MOUNT
[01:08:03]ATR MOUNT
[01:08:03]mounted ATR: paragraphs=5760, sect_size=128, sect_count=720, disk_size=0
[01:08:03]Creating a default printer using FS_SDFAT storage and type 12
[01:08:03]SSH client initialized.
[01:08:03]ModemSniffer::ModemSniffer(FS_SDFAT)
[01:08:03]SIO SETUP
[01:08:03]Set HSIO baud from 0 to 124017 (index 0), alt=126674
[01:08:03]Available heap: 3911236
[01:08:03]Setup complete @ 922 (919ms)
[01:08:05]WIFI_EVENT_STA_CONNECTED
[01:08:07]IP_EVENT_STA_GOT_IP
[01:08:07]Obtained IP address: 10.0.0.15
[01:08:07]SNTP client start
[01:08:07]Starting web server on port 80
[01:08:11]SNTP time sync event: Fri Jan  1, 01:08:12 2021 -0800