CatPix Posted January 12, 2021 Share Posted January 12, 2021 Neat I guess the "1980" date commonly seen for the European release is an average . It also may depend how you consider sale figures; does a system that was released for December 1979 count for 1979 (when talking on a general scale of influence) or more 1980? In France the 2600 was delayed up to 1981 (a side result being that no 6 switch variants of the SECAM 2600 are know to exist, and probably never existed). Quote Link to comment Share on other sites More sharing options...
carlsson Posted January 12, 2021 Share Posted January 12, 2021 Given the importance of Christmas sales, I think a system released on December 1 counts towards that year. A system released on December 27 probably accounts for very few sales on the remainder of the year, depending how weekdays lie of course. 1 Quote Link to comment Share on other sites More sharing options...
Mikebloke Posted January 12, 2021 Share Posted January 12, 2021 Interesting stuff regarding dates, my understanding is that Backgammon and Planet Defender (32, 33 on the acetronic line) came out in 1982 so presumably it was still selling for a portion of the year. I've not seen any evidence for the Acetronic/Radofin line being released before 1979 but 1978 seems to be a commonly mentioned date. I have similar issues dating the PC-50x line, as its claimed to be 1975/6 but the chips used I don't think came out for a year or two further up. Confusing stuff. Is there any dating for games beyond what year they came out for (months, any magazines with games for sale etc)? It would be great to know. Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted January 14, 2021 Author Share Posted January 14, 2021 Were these games made by each company or were there third parties developing since it seems that they are compatible between them? Quote Link to comment Share on other sites More sharing options...
carlsson Posted January 14, 2021 Share Posted January 14, 2021 (edited) Most games are listed as copyright "??? 19xx" but a few have been pinpointed. http://amigan.yatho.com/igg/ Note that the oldest verified games are dated 1980, one game is dated 1979 with question mark. Certainly if the VC-4000 was released in 1978 the earliest games must date from then or slightly before but it hasn't been verified. Possibly back then it would be a drawback to put dating on the games as it quickly would be apparent if the games were a couple years old or not. Edited January 14, 2021 by carlsson 1 Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted January 14, 2021 Author Share Posted January 14, 2021 Thanks Carlsson! Quote Link to comment Share on other sites More sharing options...
Rolo Posted January 15, 2021 Share Posted January 15, 2021 @Ricardo Cividanes: Did you have a look at http://www.vc4000.de/html/geschichte.html? There is somebody, who specialized on Interton VC4000. He already was in contact with the son of one of the former owners of INTERTON (Gerald W. Türk). Maybe he has more information, than presented on the web-site.? Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted January 15, 2021 Author Share Posted January 15, 2021 No, I didn`t. Thanks for tip! This website has a lot interisting information. I will try to contact with the responsable. Thanks @Rolo Quote Link to comment Share on other sites More sharing options...
Mikebloke Posted January 17, 2021 Share Posted January 17, 2021 On 1/14/2021 at 1:04 PM, Ricardo Cividanes da Silva said: Were these games made by each company or were there third parties developing since it seems that they are compatible between them? Most of the games were coded independently, and then the machines franchised out to various different companies in different countries. As part of this, there is a few main types of cartridge sizes, some are physically compatible and others are not - however they are all compatible software wise,and with a converter it's possible just fine. Converters existed back then too, I have a database game converter to run on an Acetronic system. This seems to have been sold by database themselves, rather than pushing sales of their own console, which is interesting. It was a lot more common at the time, but nearly never seen now. There was a big rumour that the New X Box was going to be franchised in Japan under a sega name but it didn't happen. @carlsson thanks, I've used this site a lot as it has possibly the most centralised and useful information on the system, but no luck with much else. I've been dubious of the 1978 start date for awhile, and a late 1979 seems more likely (December can be a popular month!). As almost the entire system is cloned games from atari, the dating works being later. As the 1292 line was very European as well, it had more chance of fair competition with delayed 2600 releases. Quote Link to comment Share on other sites More sharing options...
alex_79 Posted January 20, 2021 Share Posted January 20, 2021 This article from may 1978 "Personal Computing" presents the Signetics chip set 2650/2636/2622 (NTSC). 2 Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted January 20, 2021 Author Share Posted January 20, 2021 @alex_79 this is terrific! It's exactly the information what I going to need to conect the Signetics and videogame Manufacturers. This can be answer the question of how different manufacturers have released so many consoles with the same hardware. Thank you! Quote Link to comment Share on other sites More sharing options...
boulinha Posted January 21, 2021 Share Posted January 21, 2021 Note that also German magazine Elektor published from Apr to Dec 1979 some articles and schematics explaining how to build and program a "TV Game Computer" that is quite similar to Interton/Radofin one, based on Signetics 2650A & 2636. Then, from Jan 1080 to Jul 1982 they published some other articles regarding this machine. Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted January 21, 2021 Author Share Posted January 21, 2021 Great! This shows how Philips was disseminating its project in order to sell Signetics components. And the pieces will fit together. Quote Link to comment Share on other sites More sharing options...
alex_79 Posted January 21, 2021 Share Posted January 21, 2021 (edited) 6 hours ago, boulinha said: Note that also German magazine Elektor published from Apr to Dec 1979 some articles and schematics explaining how to build and program a "TV Game Computer" that is quite similar to Interton/Radofin one, based on Signetics 2650A & 2636. Then, from Jan 1080 to Jul 1982 they published some other articles regarding this machine. Yes, the Elektor "TV games computer" uses the same hardware as the Interton/1292 APVS consoles. The expansion board for the computer published In one of the later articles included, among the other improvements, two cartridge ports to use the commercial games for the Interton and Radofin consoles. The Elektor articles also mention that a few readers actually modified their consoles instead of building the computer from scratch. The Hobby module for the Radofin console (and the similar units for the Voltmace, Rowtron and Occitane) basically turn the console into the Elektor computer in its basic version. Apparently the tape format is also compatible, so you can load the software published by the Elektor magazine into an Hobby module. The two monitor software look almost identical to each other, and all the commands and the layout of the keys are the same. I tried both (with an home built eprom cartridge) on my Interton VC4000 console. elektor TVGC: Hobby Module: I'd like to build the cassette interface some day... Edited January 21, 2021 by alex_79 5 1 Quote Link to comment Share on other sites More sharing options...
Derek Andrews Posted December 2, 2021 Share Posted December 2, 2021 On 1/17/2021 at 3:20 PM, Mikebloke said: Converters existed back then too, I have a database game converter to run on an Acetronic system. This seems to have been sold by database themselves, rather than pushing sales of their own console, which is interesting. The purpose of the adapter was to enable sales of Munch&Crunch and Leapfrog cartridges to Acetronic owners. Quote Link to comment Share on other sites More sharing options...
Derek Andrews Posted December 2, 2021 Share Posted December 2, 2021 On 1/10/2021 at 5:13 PM, Ricardo Cividanes da Silva said: Another point is the amount of memory. Everybody all speak in 32. But, 32 Kilo bits or 32 Kilo Bytes? Most likely, by the time and the cost of memory at 70's, it would be 32 Kilo bits which would give about 4 Kilo Bytes. The 2650 is capable of addressing up to 32 kilobytes of memory, in four pages of 8k. However these consoles do not take advantage of page addressing so the processor can only address the first 8k. Included within this 8k memory map are the PVI and peripheral chips for reading the keypads and controlling audio circuits etc, so not all 8k can be used for ROM or RAM. I am currently writing a Wikibook, Signetics 2650 & 2636 programming, which might provide you with more technical information if you need it. There has been a lot of misinformation published and propagated on the web over the years. 1 1 Quote Link to comment Share on other sites More sharing options...
Derek Andrews Posted December 2, 2021 Share Posted December 2, 2021 On 1/11/2021 at 4:43 PM, Rolo said: There must be a clock divider, probably the strange PE1X-chip, of which I do not find any information. It is a PAL encoder, probably a prototype number for the TEA1002. And yes, it takes the crystal oscillator input and divides it by 2.5 for the 2621 Sync Generator, which in turn divides by 4 for the processor clock. Quote Link to comment Share on other sites More sharing options...
Derek Andrews Posted December 2, 2021 Share Posted December 2, 2021 On 1/11/2021 at 9:26 AM, Ricardo Cividanes da Silva said: Signetics 2636, as I understand it, is a kind of video processor ....... I think 'processor' is not a good term to use; I've even come across people calling it a co-processor. In reality it is just a bunch of registers, counters and logic circuits and should really be considered as the same type of chip as say the 6521 Peripheral Interface Adapter, except that it outputs video rather than handling parallel I/O. Its full title is Programmable Video Interface and is totally controlled by setting values into its registers. It just chugs away counting horizontal and vertical lines and using data from the registers at appropriate times to output RGB values. Quote Link to comment Share on other sites More sharing options...
boulinha Posted December 10, 2021 Share Posted December 10, 2021 On 12/2/2021 at 1:32 PM, Derek Andrews said: I am currently writing a Wikibook, Signetics 2650 & 2636 programming, which might provide you with more technical information if you need it. There has been a lot of misinformation published and propagated on the web over the years. Amazing Derek! I will read and learn it Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted September 13, 2022 Author Share Posted September 13, 2022 Hey guys. I spoke with Laury Scotty, who was CEO of Radofin at the time of the 1292's launch among other consoles. He told me that Signetics actually came up with the project ready and offered it to them and they manufactured it under the Radofin brand and for any other client making some adjustments and putting the client's brand on it. In the case of Interton and several others, they also purchased the Signetics design that made changes, such as the cartridge entry, as per the customer's request. Mr Scott also said that Radofin had some programmers in Hong Kong who developed exclusive games. He even told me that they made a Space Invaders and that he recently found out that Interton had copied their game and released it as their own. So that's it. The project was from Signetics that spread this video game model across Europe and Asia. By the way, I'm looking for a really cool photo of the Radofin 1292 and I'd like to know if any of you have it for me. 1 Quote Link to comment Share on other sites More sharing options...
+5-11under Posted September 13, 2022 Share Posted September 13, 2022 The schematic is shown in the Signetics 2636 Datasheet. I'm guessing it's basically the same as the Radofin and the others. A pretty clean version can be found here: http://vgamuseum.info/images/doc/signetics/2636_pvi.pdf Quote Link to comment Share on other sites More sharing options...
carlsson Posted September 13, 2022 Share Posted September 13, 2022 Hm, should we claim that the 1292 was the first console with third party titles, ahead of both Odyssey^2 and Atari 2600? I mean if Signetics both came up with the chipset and a reference design, and various manufacturers made software wise compatible games, we could consider Radofin, Interton, Acetronic etc to be third parties who manufactured their own machines. Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted September 13, 2022 Author Share Posted September 13, 2022 9 hours ago, 5-11under said: The schematic is shown in the Signetics 2636 Datasheet. I'm guessing it's basically the same as the Radofin and the others. A pretty clean version can be found here: http://vgamuseum.info/images/doc/signetics/2636_pvi.pdf Yes. According to Mr. Scott, Radofin started from the finished project by Signetics, which must be the one you posted, and the other manufacturers as well. He commented that Signetics made most of the games, but that Radofin and the other manufacturers created - and copied - their own. Quote Link to comment Share on other sites More sharing options...
carlsson Posted September 13, 2022 Share Posted September 13, 2022 8 hours ago, Ricardo Cividanes da Silva said: Signetics made most of the games I was about to remark that it shows, but then again Senile last year tried to explain how weak the Signetics chipset is compared to e.g. Atari 2600, so perhaps they could not make the games that much more playable, though most look fairly nice. Quote Link to comment Share on other sites More sharing options...
Ricardo Cividanes da Silva Posted September 14, 2022 Author Share Posted September 14, 2022 5 hours ago, carlsson said: I was about to remark that it shows, but then again Senile last year tried to explain how weak the Signetics chipset is compared to e.g. Atari 2600, so perhaps they could not make the games that much more playable, though most look fairly nice. The Signetics chip was a bit old compared to the MOS 6507 used in the 2600, but I think it fulfilled the role of entertaining a lot of people. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.