Jump to content
IGNORED

Interest check for a run of 7800 joysticks


Bratwurst

Recommended Posts

NOTICE: Please refer to the dedicated marketplace thread if you want to request one:

 

 

The stick and buttons are clicky and have a good tactile feel for Chinese clone hardware. The button layout is such that I can lay my fingers over them like a traditional arcade control panel or use my thumb hugging the side like a gamepad. Rubber feet make it sturdy against a desktop or you can hold it in your lap.

 

Done/shipped:

joeatari1 -Buttons on left side, joystick on right side -shipped
bydoempire -Buttons on left side, joystick on right side -shipped
-^CrossBow^- -Joystick on left side, buttons on right side -shipped
Gandor -Joystick on left side, buttons on right side -shipped
hizzy - Buttons on left side, joystick on right side -skipped
Oldschool80skid -Joystick on left side, buttons on right side -shipped
TrekMD - Buttons on left side, joystick on right side -shipped
JVersh - Joystick on left side, buttons on right side -shipped
john_q_atari - Buttons on left side, joystick on right side -shipped

mmervine - Buttons on left side, joystick on right side -shipped

ZeroPage Homebrew -Joystick on left side, buttons on right side -shipped
SledgeHammerD - Joystick on left side, buttons on right side -shipped
Neogeoman - Joystick on left side, buttons on right side -shipped
ZillaRUSH - Buttons on left side, joystick on right side -shipped

 

If you're on the list please me know your preference:

 

gBJf5ji.jpg

 

Edited by Bratwurst
  • Like 12
  • Thanks 2
Link to comment
Share on other sites

7 minutes ago, BydoEmpire said:

They look pretty cool. I would love to get one... if the stick was on the right.  Not sure if that's something possible to configure before you put them together.

I could easily mirror the pictured design in the first post. Made a template when I went to drill the holes so I'd get the spacing proper, that could be flipped around.

  • Like 1
Link to comment
Share on other sites

20 minutes ago, hizzy said:

I like it! Can I replace the buttons & stick with my own?

I think so, but you'd have to verify the mount plate dimensions as I use a 3D printed harness to mount the stick. I might have to include a different harness or you might have to find a way to mount it yourself. The buttons are standard 24mm through-holes.

Link to comment
Share on other sites

1 hour ago, Zonie said:

Would you be interested in selling just the enclosures?

Those don't look like anything I've seen from the usual suppliers.

 

Certainly. I'll get in touch, I have a bunch of the enclosures.

 

I've ordered materials to do a few more of these sticks and I'll reach out to people in the order that they expressed interest as I produce them, but be aware that it's going to be scheduled around my free time so don't expect anything overnight.

  • Like 3
  • Thanks 1
Link to comment
Share on other sites

On 2/13/2021 at 6:30 PM, Bratwurst said:

I could easily mirror the pictured design in the first post. Made a template when I went to drill the holes so I'd get the spacing proper, that could be flipped around.

Just in case it wasn't clear from my reply, definitely put me down for one w/ buttons on left/joystick on right as well if available.

Link to comment
Share on other sites

On 2/17/2021 at 4:56 PM, BydoEmpire said:

Just in case it wasn't clear from my reply, definitely put me down for one w/ buttons on left/joystick on right as well if available.

I figured. Please see below:

 

BuUcDdL.jpg

 

This good? I assume you'd want the arrangement to be right fire, left fire, joystick. But if you want left fire, right fire then joystick I can do that, just lemme know.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

36 minutes ago, Bratwurst said:

I figured. Please see below:

 

This good? I assume you'd want the arrangement to be right fire, left fire, joystick. But if you want left fire, right fire then joystick I can do that, just lemme know.

Awesome, that looks amazing.  I don't really know if I have a strong preference so I'm fine either way, but if I can choose I'd probably rather have left fire, right fire, joystick.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...