1200XL M.U.L.E. Posted March 10, 2021 Share Posted March 10, 2021 I’d like to find a “classic” joystick for my NES, like a good old Atari CX40. It has a stick and a button. I have some Amazon gift dollars to spend and thought I could find something there. A search for “nes joystick” yielded very few results. Am I searching with the wrong terms? Can anyone here offer a recommendation? Thanks! 2 Quote Link to comment Share on other sites More sharing options...
Rhomaios Posted March 10, 2021 Share Posted March 10, 2021 Like the Advantage? 2 Quote Link to comment Share on other sites More sharing options...
K-Rod 13 Posted March 10, 2021 Share Posted March 10, 2021 Quickshot Joystick maybe? 2 Quote Link to comment Share on other sites More sharing options...
1200XL M.U.L.E. Posted March 11, 2021 Author Share Posted March 11, 2021 Thanks for the replies! @Rhomaios It's a bit big but something along the same lines of durability would be nice. I like Wico joysticks because they are very tough. @K-Rod 13 Yes, something like that! How durable is it? Can it take some hard jerks or it prone to breaking from heavy use? I will definitely look into this model. Quote Link to comment Share on other sites More sharing options...
4300 Posted March 12, 2021 Share Posted March 12, 2021 The quick shot is nice. It uses micro switches, so it's clicky 1 Quote Link to comment Share on other sites More sharing options...
Tanooki Posted March 12, 2021 Share Posted March 12, 2021 I think I have one of those quickshots on a shelf around here, never bothered to use it. It's based directly being a copy of a PC joystick that I did use extensively in the early 90s playing the old Wing Commander TIE and Xwing games for more hours than I could guess without a problem so it's not weak. 1 Quote Link to comment Share on other sites More sharing options...
+GoldLeader Posted March 14, 2021 Share Posted March 14, 2021 You might search for "NES Arcade Stick". I'm suddenly intrigued with one I found on eBay and Amazon that Does have MicroSwitches (Like the Emio for NES Classic), except this is made for NES, but, and here comes a Huge Caveat, It's made by Retro-Bit. Probably a dealbreaker for me as I've had it with the crap joysticks they've made in the past. And I know everyone is trying to forgive them because they Finally put out one good Genesis pad, (And technically I don't hate my Retro-Duo), But I also still remember that the worst Genesis pad I ever bought was by Retro Bit and their SNES pads sucked too for the most part, except for the wireless version which were OK as I recall (I barely ever use them so I'm going off of my initial reaction). I really wish this was made by someone else (ATGAmes or Hyperkin would be fine...there, I said it). Still it looks like it'd be hard to mess this one up. Looks like an NES Advantage, and if it really has microswitches and controls like the Emio, well (begrudgingly) it might be worth a look...(Although no turbo) Now, Doesn't it look similar to this one for NES Classic? Quote Link to comment Share on other sites More sharing options...
Reaperman Posted March 18, 2021 Share Posted March 18, 2021 (edited) I recommend the old (and not on amazon) NES version of the Epyx 500xj (aka Konix Speedking in euroland). I grew up with the Atari version and it's a very responsive, reliable, and durable stick. Its durability was the reason my parents got me one, since I was too young to understand the proper force to apply and broke a number of sticks prior. The NES 500xj is quite commonly available on ebay, etc. It's not so great for the games people usually want to play on NES (SMB, contra, metroid), but it is perfect for the NES's more classic-era games (balloon fight, galaga, elevator action), and it really shines on something like an NT Mini where it does fantastic for 2600/7800/etc, since that's the controller I'd typically use for that era anyway. Lately I've been playing pac-man ce, and choosing the 500xj over my neo geo to nes controller adapter, as the 500xj's shorter throw is noticeably more responsive than typical arcade hardware. I will say that while the 500xj prided itself on ergonomics BITD, it developed a reputation as a bit of a hand-crippler. I grew up on one, and even I actually have to switch hands every so often, using it both rh and lh. Yes, the pain is real with this controller. awesome stick, but not available on amazon: Edited March 18, 2021 by Reaperman 2 Quote Link to comment Share on other sites More sharing options...
the_wizard_666 Posted March 21, 2021 Share Posted March 21, 2021 Not sure how well it works, but another option is the Suncom Mothership. Basically, you stick a control pad inside, and it turns it into a joystick. I have one, but since I prefer pads I've never tried it out. Could be another option for you to look for. Quote Link to comment Share on other sites More sharing options...
MrMaddog Posted March 25, 2021 Share Posted March 25, 2021 On 3/20/2021 at 10:43 PM, the_wizard_666 said: Not sure how well it works, but another option is the Suncom Mothership. Basically, you stick a control pad inside, and it turns it into a joystick. I have one, but since I prefer pads I've never tried it out. Could be another option for you to look for. I bought one of those from Radio Shack but they just weren't responsive at all... I also got the Beeshu Zinger in my quest for an Atari style joystick for the NES but that thing wore out quick, the plastic was so cheap that it grinded away at the stick's base, producing dust, to the point where it didn't work anymore. I've always had lousy lucky with 3rd party NES controllers so I ended up using paper towels & vinyl tape to have padding around the standard gamepads. Quote Link to comment Share on other sites More sharing options...
DavidD Posted April 1, 2021 Share Posted April 1, 2021 As a side note, I was curious about finding a video showing the Mother Ship in use... and I stumbled across a website selling them for $19. That sounds both more than I'd want to pay, but somehow cheaper than I was expecting. Has anyone heard of "Lukie Games"? https://www.lukiegames.com/suncom-mothership-joystick-nintendo Quote Link to comment Share on other sites More sharing options...
Reaperman Posted April 1, 2021 Share Posted April 1, 2021 (edited) 13 hours ago, DavidD said: As a side note, I was curious about finding a video showing the Mother Ship in use... and I stumbled across a website selling them for $19. That sounds both more than I'd want to pay, but somehow cheaper than I was expecting. Has anyone heard of "Lukie Games"? https://www.lukiegames.com/suncom-mothership-joystick-nintendo Yeah, I use them a lot, both on their site, and on ebay. Unless things recently changed on their site, they have a $25 of stuff=free shipping deal, as well as a rewards program. Good people. If you sort by price to do your shopping, do a second search for the game by name, you might find a slightly more expensive one in better shape. (I find myself sorting for cheap stuff to make $25 worth of purchase a lot there) Edited April 1, 2021 by Reaperman 1 Quote Link to comment Share on other sites More sharing options...
Trinity Posted April 3, 2021 Share Posted April 3, 2021 What I would love would be a four way only joystick for the pacman games. I hate mashing a d-pad and then ending up going in the wrong direction at a corner while playing pacman. So frustrating! 2 Quote Link to comment Share on other sites More sharing options...
Rhomaios Posted April 7, 2021 Share Posted April 7, 2021 On 4/3/2021 at 2:14 AM, Trinity said: What I would love would be a four way only joystick for the pacman games. I hate mashing a d-pad and then ending up going in the wrong direction at a corner while playing pacman. So frustrating! They make plastic overlays/inhibitors that prevent shifting the stick diagonally. I've never seen such a thing for a joypad, though, and doubt it can be done cleanly. Quote Link to comment Share on other sites More sharing options...
homerhomer Posted May 4, 2021 Share Posted May 4, 2021 Have you thought of looking into wireless? I've personally considered buying wireless adapters and then using something like this and a receiver. I'm not 100% sure it will work and it's little spendy, but that's the hobby these days. ? https://www.amazon.com/dp/B08GJC5WSS/ref=cm_sw_r_cp_apa_glt_fabc_J7WKGZZWJX2NR8X0FC77?_encoding=UTF8&psc=1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.