TGB1718 Posted March 31, 2021 Share Posted March 31, 2021 I have just one key sticking when pressed, think it just needs a clean, I want to take the keycap off does it just pull off or is there some sort of tool to do this, don't want to break anything. Quote Link to comment Share on other sites More sharing options...
Tuxon86 Posted March 31, 2021 Share Posted March 31, 2021 I use two spoon to remove keycap. You can also buy a key puller if you think you'll do this often Quote Link to comment Share on other sites More sharing options...
Sugarland Posted March 31, 2021 Share Posted March 31, 2021 It is advised to use a wire keycap puller. If you want to pull it off with your fingers (difficult to do) then be sure to carefully pull it straight up, perpendicular to the keyboard's angle. 2 Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted March 31, 2021 Author Share Posted March 31, 2021 Thanks for the advice guys, @Sugarland also thanks for the picture, I could make something like that quite easily Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted April 1, 2021 Author Share Posted April 1, 2021 Made a little tool and removed the Cap, the reason the key is sticking is the black plunger inside is cracked, only tiny, but enough to spread a bit when the key is on, it's fine with the cap off Are these available anywhere ? Quote Link to comment Share on other sites More sharing options...
Dinadan67 Posted April 1, 2021 Share Posted April 1, 2021 Maybe the ones for Amiga keyboards fit. Quote Link to comment Share on other sites More sharing options...
TGB1718 Posted April 1, 2021 Author Share Posted April 1, 2021 Thanks, I'll check them out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.