cmoxm1983 Posted April 5, 2021 Share Posted April 5, 2021 (edited) How about someone create a custom dust flap for the Atari Jaguar? I mean something similar to the Nintendo 64 or Sega Mega Drive. Edited April 5, 2021 by cmoxm1983 Quote Link to comment Share on other sites More sharing options...
+eebuckeye Posted April 5, 2021 Share Posted April 5, 2021 I'd be interested for many consoles including Jaguar! Quote Link to comment Share on other sites More sharing options...
schnuth Posted April 5, 2021 Share Posted April 5, 2021 I have this dust cover for the entire console that I quite like:https://printerboy.net/shop/dustcover/atari/atari-jaguar-dust-cover/ 1 Quote Link to comment Share on other sites More sharing options...
sirlynxalot Posted April 5, 2021 Share Posted April 5, 2021 I think I saw a 3d printed piece you could stick in the cart slot on etsy many years ago. Imo it didn't look that great aesthetically, and you'd have to manually remove it each time you placed a cartridge in the slot. Many people just leave a cart in the slot, if you're concerned about having a circuit board in the slot, you could just use an empty plastic cartridge shell to basically cover the components in the slot without actually having a circuit board in contact with the slot pins. 2 Quote Link to comment Share on other sites More sharing options...
+Stephen Moss Posted April 6, 2021 Share Posted April 6, 2021 7 hours ago, cmoxm1983 said: How about someone create a custom dust flap for the Atari Jaguar? I mean something similar to the Nintendo 64 or Sega Mega Drive. I do not think there is a way of adding such a thing to the Jaguar without out either clipping some big ugly thing over the top of the Jaguar or hacking a big hole in the case to accommodate it as the thickness of the flaps would narrow the width of the cartridge slot thereby preventing correct cartridge insertion. Apart from the aforementioned options perhaps the only other thing you could try is to cut a couple of strips of thin, flexible clear plastic (i.e. from a bag) and tape them alone the length of the cartridge slot with the strips meeting in the middle of the slots width. That may be enough to reduce dust ingress while still permitting cartridge insertion/removal However, it is not a solution I would try myself as it probably would not look very nice or last very long. I usually just re-box my Jag when I have finished with it and if I were to leave it out I would be looking at an all over dust cover. Quote Link to comment Share on other sites More sharing options...
cmoxm1983 Posted April 6, 2021 Author Share Posted April 6, 2021 I think there would be a market making a dust flap for the Jaguar. Do you guys know of anyone that could do this? I think a good idea would be a flap that could sit in the slot and maybe be secured with some self-adhesive. Someone has to have a better idea or making one. Someone needs to think up of a way to make a dust flap for the Jaguar. Quote Link to comment Share on other sites More sharing options...
+CyranoJ Posted April 6, 2021 Share Posted April 6, 2021 I had some of these 3D printed for my spare: But as it sits on a shelf with a hat on it, not sure what it gained 3 Quote Link to comment Share on other sites More sharing options...
cmoxm1983 Posted April 6, 2021 Author Share Posted April 6, 2021 No guys I mean a proper dust flap like the Sega Mega Drive or Nintendo 64... What do you guys think? Do you think it will ever be created? Quote Link to comment Share on other sites More sharing options...
sirlynxalot Posted April 6, 2021 Share Posted April 6, 2021 (edited) No, there is not enough demand to make a custom part because it would require modification to the plastic shell of the jaguar to have a hinged flap like the genesis/n64. There are probably only few people who have the skills to do a good looking job and would want to go through the trouble to mod the jag's shell when jag's now sell for $300. And in the end, what do you really gain from a dust flap? I've never heard of anyone's console breaking down because the cart slot was exposed to dust for too long... Edited April 6, 2021 by sirlynxalot Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted April 6, 2021 Share Posted April 6, 2021 28 minutes ago, sirlynxalot said: No, there is not enough demand to make a custom part because it would require modification to the plastic shell of the jaguar to have a hinged flap like the genesis/n64. There are probably only few people who have the skills to do a good looking job and would want to go through the trouble to mod the jag's shell when jag's now sell for $300. And in the end, what do you really gain from a dust flap? I've never heard of anyone's console breaking down because the cart slot was exposed to dust for too long... Pretty much this. Reshaping/cutting/filing existing plastic and making it look good is a real chore. The easiest solution to keeping out dust is to just cover the system with a soft cloth when I'm not using it. 1 Quote Link to comment Share on other sites More sharing options...
cmoxm1983 Posted April 7, 2021 Author Share Posted April 7, 2021 Don'r you think people would want to make there Jaguar keep dust out, with a proper moulded duat flap? Quote Link to comment Share on other sites More sharing options...
cmoxm1983 Posted April 7, 2021 Author Share Posted April 7, 2021 Just now, cmoxm1983 said: Don't you think people would want to make there Jaguar keep dust out, with a proper moulded duat flap? Quote Link to comment Share on other sites More sharing options...
+cubanismo Posted April 8, 2021 Share Posted April 8, 2021 On 4/6/2021 at 7:23 AM, Bratwurst said: The easiest solution to keeping out dust is to just cover the system with a soft cloth when I'm not using it. Respectfully disagree. The easiest solution is just leaving a cartridge in it when you're not using it. 1 Quote Link to comment Share on other sites More sharing options...
cmoxm1983 Posted April 8, 2021 Author Share Posted April 8, 2021 If you leave the cart in the Jaguar for very extended periods of time the cart pins stretch... this will damage the console. I hope someone decides to make a custom dust flap for the Jaguar. Quote Link to comment Share on other sites More sharing options...
walter_J64bit Posted April 8, 2021 Share Posted April 8, 2021 7 hours ago, cmoxm1983 said: If you leave the cart in the Jaguar for very extended periods of time the cart pins stretch... this will damage the console. I hope someone decides to make a custom dust flap for the Jaguar. My JagCD stay in Cart slot for extended periods of time, I have no problems and I don't see remove the JagCD ever time I don't use it. Quote Link to comment Share on other sites More sharing options...
Doomy Doomer Posted April 8, 2021 Share Posted April 8, 2021 If there's interest in this I could create a custom 3D printed cover and throw it on my store. I've been meaning to make one for my Jaguar and my custom MVS console I made but neglected to design a cover. The part wouldn't be expensive since it's just a pop on "hood" you slide on when not in use. Quote Link to comment Share on other sites More sharing options...
+jgkspsx Posted April 8, 2021 Share Posted April 8, 2021 I use this: https://www.ebay.com/itm/Dust-cover-for-the-Atari-JAGUAR-brand-new-/373414373848 Not only does it look nice, it supports RetroVenture and through them the SillyVenture competition. It’s not as convenient as a pop-on slot cover to put aside when I’m playing, but oh well. My spare Jag is in a sealed plain cardboard box labeled OPEN IN CASE OF EMERGENCY. Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted April 8, 2021 Share Posted April 8, 2021 I have a cart slot dust cover that I bought from Germany in July 2019 for €9.99. It's made of a semi-firm foam-type product. It kind of matches the console finish. I'm happy with it. I'd share the seller's info but apparently he got banned from AtariAge. Quote Link to comment Share on other sites More sharing options...
Ross PK Posted April 8, 2021 Share Posted April 8, 2021 15 hours ago, cmoxm1983 said: If you leave the cart in the Jaguar for very extended periods of time the cart pins stretch... this will damage the console. I hope someone decides to make a custom dust flap for the Jaguar. I always leave a cart in my Jag, but if what you're saying is true then I need to stop doing that. Can any other people confirm or deny that the cart pins stretch over time? Quote Link to comment Share on other sites More sharing options...
K3V Posted April 8, 2021 Share Posted April 8, 2021 I've been leaving carts in my Jaguar for ~25 years. It's fine. 1 Quote Link to comment Share on other sites More sharing options...
Doomy Doomer Posted April 8, 2021 Share Posted April 8, 2021 (edited) Ok here's what I've put up on my shop for anyone interested. https://www.humblebazooka.com/product/atari-jaguar-cartridge-cover/ Edited April 8, 2021 by Doomy Doomer 4 Quote Link to comment Share on other sites More sharing options...
sirlynxalot Posted April 8, 2021 Share Posted April 8, 2021 As far as these things go, it looks pretty cool. 1 Quote Link to comment Share on other sites More sharing options...
+Stephen Moss Posted April 9, 2021 Share Posted April 9, 2021 8 hours ago, Doomy Doomer said: Ok here's what I've put up on my shop for anyone interested. Looks nice but with seemingly nothing to get hold of I am wondering how easy is it to remove for those without long fingernails to get underneath it. Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted April 9, 2021 Share Posted April 9, 2021 6 Quote Link to comment Share on other sites More sharing options...
PeterG Posted April 9, 2021 Share Posted April 9, 2021 4 minutes ago, Zerosquare said: Lol, now that goes well with the Jaguar CD ROM. 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.