+InsaneMultitasker Posted April 5, 2021 Share Posted April 5, 2021 Some time back, early 2020 perhaps, someone posted what appeared to be original, commented source code for the TI Disk Controller. I took note of this for future review, alas, I must not have saved the file(s) and I cannot find a reference to the post. I spent the afternoon trying to find the post using the forum search mechanism. I am hoping someone remembers posting the source and/or knows which topic to look in? (The code was not a disassembly nor was it from Thierry's tech pages. ) Thank you Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted April 6, 2021 Share Posted April 6, 2021 http://ftp.whtech.com/source/ti-disk-card.src ? 1 Quote Link to comment Share on other sites More sharing options...
+mizapf Posted April 6, 2021 Share Posted April 6, 2021 We are looking for the original source code from TI, as I suppose, to find information about timing issues with the Geneve (in ROMPAGE mode), right? But wouldn't that imply that someone added comments to the source code later? I'm not sure whether this was documented in the original, commented source code. Maybe a better bet would be on the commented source code of the Geneve Boot EPROM or other Geneve documents. I have a collection of that source code, I think, from Beery. Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted April 6, 2021 Author Share Posted April 6, 2021 19 minutes ago, mizapf said: Maybe a better bet would be on the commented source code of the Geneve Boot EPROM BOOTEPROM and LOADSYS Reconciled 2014Sept19.DSK I'll post this into the Geneve OS Dev post #1 for future reference, or Beery can post into his EPROM dev topic. I didn't remove the "restriction" file as it is a moot point at this time. 2 Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted April 6, 2021 Author Share Posted April 6, 2021 Ksarul posted the file that I had in mind Quote Link to comment Share on other sites More sharing options...
+FALCOR4 Posted April 7, 2021 Share Posted April 7, 2021 On 4/5/2021 at 3:55 PM, InsaneMultitasker said: Some time back, early 2020 perhaps, someone posted what appeared to be original, commented source code for the TI Disk Controller. I took note of this for future review, alas, I must not have saved the file(s) and I cannot find a reference to the post. I spent the afternoon trying to find the post using the forum search mechanism. I am hoping someone remembers posting the source and/or knows which topic to look in? (The code was not a disassembly nor was it from Thierry's tech pages. ) Thank you I have TI source code for the sidecar controller. Thought I had posted it somewhere; will have to look. I once did a quick side-by-side comparison with some other disassembled code from the PEB controller card and it is very close. There were some code additions/differences that I thought could be easily reconciled at the time. 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted April 7, 2021 Share Posted April 7, 2021 4 minutes ago, FALCOR4 said: I have TI source code for the sidecar controller. Thought I had posted it somewhere; will have to look. That's the code I posted in the other thread, @FALCOR4 2 Quote Link to comment Share on other sites More sharing options...
+FALCOR4 Posted April 7, 2021 Share Posted April 7, 2021 2 hours ago, Ksarul said: That's the code I posted in the other thread, @FALCOR4 Copy. I was a step behind you but finally caught up! ? Thanks Ksarul! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.