irich2 Posted August 30, 2021 Share Posted August 30, 2021 On 8/29/2021 at 10:57 AM, Brentarian said: @irich2, If you are running a TNFS server on an RPi, why not also use that RPi as an access point and keep near your Fujinet? https://thepi.io/how-to-use-your-raspberry-pi-as-a-wireless-access-point/ Great suggestion! I was thinking that this would wind up being my solution to use wired ethernet with FujiNet in the end. Quote Link to comment Share on other sites More sharing options...
irich2 Posted August 30, 2021 Share Posted August 30, 2021 23 hours ago, Mazzspeed said: If you want Ethernet, run FujiNet-PC on a RPi. That's what I do and Ethernet works fine. I have no problem using WiFi, that's just how my RPi400 was configured when I installed FujiNet-PC, so I left it that way. I haven't heard of this. Thank you for the suggestion! I will look into this as another option. 1 Quote Link to comment Share on other sites More sharing options...
irich2 Posted August 30, 2021 Share Posted August 30, 2021 Thank you @mozzwald and @mytek for your feedback about a potential wired/wireless FujiNet. I agree that the FujiNet servers the vast majority of the Atari community very well in its current state. The discussion did lead to some excellent suggestions to add a "wired" ability to FujiNet by either (1) using a RPi as a wireless access point (Thank You, @Brentarian!) or (2) using a SIO2PC-USB adapter with the FujiNet-PC project (Thank You @apc and @Mazzspeed!). 3 Quote Link to comment Share on other sites More sharing options...
ok1rp Posted September 20, 2021 Share Posted September 20, 2021 Hi all, maybe stupid question, sorry for that > is there someone tried to connect two Atari 800XL through Fujinet to gaming or even better transfer data or making serious work online please? Sorry > quite newbie with Fujinet ...but happy Fujinet card owner over here regards, Petr O. Quote Link to comment Share on other sites More sharing options...
mozzwald Posted September 20, 2021 Share Posted September 20, 2021 6 hours ago, ok1rp said: Hi all, maybe stupid question, sorry for that > is there someone tried to connect two Atari 800XL through Fujinet to gaming or even better transfer data or making serious work online please? Sorry > quite newbie with Fujinet ...but happy Fujinet card owner over here regards, Petr O. Games: Midimaze and Warships are 2 other games. This thread is about FujiNet hardware, you should probably start a new thread topic in this subforum and ask again. Quote Link to comment Share on other sites More sharing options...
ok1rp Posted November 11, 2021 Share Posted November 11, 2021 Hi all, is it possible to read the SD card inserted directly into the Fujinet card slot please? Tried to do it but I see an error in reading. Thanks for hint. Petr Quote Link to comment Share on other sites More sharing options...
mozzwald Posted November 11, 2021 Share Posted November 11, 2021 3 hours ago, ok1rp said: Hi all, is it possible to read the SD card inserted directly into the Fujinet card slot please? Tried to do it but I see an error in reading. Thanks for hint. Petr Can you please clarify / rephrase your question? Are you not able to access/mount disk images from the SD card on FujiNet? Quote Link to comment Share on other sites More sharing options...
ok1rp Posted November 11, 2021 Share Posted November 11, 2021 (edited) Well, so sorry for my bad expression... The goal is to boot SpartaDOS from SD card inserted in Fujinet > so if I am right I have problem to mount disk images from SD card on Fujinet... Petr Edited November 11, 2021 by ok1rp Quote Link to comment Share on other sites More sharing options...
mozzwald Posted November 11, 2021 Share Posted November 11, 2021 2 hours ago, ok1rp said: Well, so sorry for my bad expression... The goal is to boot SpartaDOS from SD card inserted in Fujinet > so if I am right I have problem to mount disk images from SD card on Fujinet... Petr Your SD card should be formatted FAT32 and contain your disk image files. In CONFIG you need a Host Slot named "SD" which, when selected will show the contents of the SD card and you can select a disk image to mount. If you are getting an error message, please post it here. Also it would be useful to post the serial debug output by connecting Fujinet to a computer, running fujinet flasher, pressing the serial debug output button, try loading a file from SD and copy/paste that info here (in a spoiler tag preferably). 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.