Totorb2x Posted April 23, 2021 Share Posted April 23, 2021 Hi, I use a "Scart to hdmi box". it works perfectly with all consoles except with the jaguar and its RGB cable: The image shifts to the left or right every 5 seconds. As if there was a horizontal sync problem. You can help me ? Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted April 23, 2021 Share Posted April 23, 2021 (edited) Edited April 23, 2021 by Zerosquare 1 Quote Link to comment Share on other sites More sharing options...
Totorb2x Posted April 23, 2021 Author Share Posted April 23, 2021 (edited) ok thanks, I will try when I have the resistance. Resistors i have : multimeter at 20Kohms : 4,69 Multimeter at 200ohms : 47,6 Multimeter at 20Kohms : 9,93 Edited April 23, 2021 by Totorb2x Quote Link to comment Share on other sites More sharing options...
UHATEIT Posted April 25, 2021 Share Posted April 25, 2021 I've never bothered with the SCART cable craze. But I use a basic Amazon AV to hdmi adapter for one of my tvs and have no issues at all with it showing up on the TV. Quote Link to comment Share on other sites More sharing options...
Totorb2x Posted April 28, 2021 Author Share Posted April 28, 2021 Just tried the 1,2k tips : still the same image problems, but now i have more parasites ! Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted April 28, 2021 Share Posted April 28, 2021 What kind of video cable is it? An official one or not? Do you have access to another TV with a SCART input to test it? Quote Link to comment Share on other sites More sharing options...
Totorb2x Posted April 29, 2021 Author Share Posted April 29, 2021 don't know :s The hdmi box converter works perfectly with my other systems (snes, wii,...) intoi the scart there is no wire connected to the 8 pin, but one to the 16 . I ve just tried to put a 220omhs between wire and the 16 : two separates images superimposed. (and the shift issue continue) Quote Link to comment Share on other sites More sharing options...
Totorb2x Posted April 30, 2021 Author Share Posted April 30, 2021 I ve remake all solders. (Old ones were realy ugly). Nothing has change... I will do a shema if m'y Rgb cable. Maybe Can be Help... Quote Link to comment Share on other sites More sharing options...
Totorb2x Posted April 30, 2021 Author Share Posted April 30, 2021 There it is : 20. 11B 18. 10B 16. 6A 6. 1A 4. 3B 2. 1B 15. 4B 13. 7A 7. 5A Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted May 2, 2021 Share Posted May 2, 2021 OK, your cable doesn't need the resistor on pin #20. There's another fix for sync problems, but usually it's not needed for HDMI converters: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.