Unbeliever Posted May 17, 2021 Share Posted May 17, 2021 Hi, folks: I have a 6 switch light that I've had for years and it still runs top notch. However, the power button seems to have an issue when I power on a game, sometimes the game goes all glitch like until I flip it a few more times. After a few flips, the game is fine. Do you folks think it's a connection or just dirty? I'm not at all comfortable opening up the system to see what's wrong, as I have a tendency to wreck things once I tinker like that. If you could recommend a good cleaning, however, and a solution that might do the trick, I would appreciate your insights. In addition, if I leave the power switch on and turn off the system with the power strip, it seems absolutely fine when it powers on (no flicker). Could be a bad switch in general, I think. Your thoughts would be welcome. Steve Quote Link to comment Share on other sites More sharing options...
Deteacher Posted May 18, 2021 Share Posted May 18, 2021 It could just be a dirty switch. You could try spraying some contact cleaner into the power switch, then exercising the switch back and forth a few times. If you did decide to open it up, you could try using a q-tip and isopropyl alcohol on the switch. Hopefully, that's all it is, but it could also be a cracked solder joint, causing it to flake in and out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.