Swami Posted May 29, 2021 Share Posted May 29, 2021 I've put off buying an LCD light gun because I've heard they are difficult to keep calibrated after a lot of messing around. I just got a Sinden light gun and although it mostly handles MAME and dolphin games after calibration without the issues of the AimTrak, it does not work as a mouse for Steam games fixed to use a mouse for gun aiming or other emulators that have mouse but not lightgun. So, to get to the question, will the AimTrak work as a mouse in any mouse application for a PC? I've heard a Wiimote may also work okay as a mouse and can have a bit of gun fell with the Wii gun accessories. Anyone have any experience with this? Thanks Quote Link to comment Share on other sites More sharing options...
Class316 Posted May 29, 2021 Share Posted May 29, 2021 I'd also like to know if there's a definitive light gun solution that works with all emulators and games that use the mouse as a gun cursor. Quote Link to comment Share on other sites More sharing options...
Swami Posted June 4, 2021 Author Share Posted June 4, 2021 On 5/29/2021 at 1:38 PM, Class316 said: I'd also like to know if there's a definitive light gun solution that works with all emulators and games that use the mouse as a gun cursor. Nobody knows. Quote Link to comment Share on other sites More sharing options...
Swami Posted June 5, 2021 Author Share Posted June 5, 2021 On 5/29/2021 at 1:38 PM, Class316 said: I'd also like to know if there's a definitive light gun solution that works with all emulators and games that use the mouse as a gun cursor. I got the dolphin bar and tried the Wii Remote Plus with CoolCV slither and Operation Wolf. It moves in the right directions, but it is jerky and laggy even with the mouse at lowest sinsitivity. It is not playable. I am going to try a couple MAME trackball/mouse games with analog sensitivity as low as possible and see if it works better. It sees the inputs from the Wiimote as Gun B0, B1, Y1, X1, etc., so, that does not bode well, as it did the same for the Sinden. It seems odd that the Dolphin bar setting is "mouse+keyboard" but MAME is recognizing it as a Gun. Quote Link to comment Share on other sites More sharing options...
Class316 Posted June 5, 2021 Share Posted June 5, 2021 11 hours ago, Swami said: I got the dolphin bar and tried the Wii Remote Plus with CoolCV slither and Operation Wolf. It moves in the right directions, but it is jerky and laggy even with the mouse at lowest sinsitivity. It is not playable. I am going to try a couple MAME trackball/mouse games with analog sensitivity as low as possible and see if it works better. It sees the inputs from the Wiimote as Gun B0, B1, Y1, X1, etc., so, that does not bode well, as it did the same for the Sinden. It seems odd that the Dolphin bar setting is "mouse+keyboard" but MAME is recognizing it as a Gun. I just have a generic USB sensor bar. Does that work just as good? Quote Link to comment Share on other sites More sharing options...
Swami Posted June 5, 2021 Author Share Posted June 5, 2021 5 minutes ago, Class316 said: I just have a generic USB sensor bar. Does that work just as good? i think so Quote Link to comment Share on other sites More sharing options...
Swami Posted June 6, 2021 Author Share Posted June 6, 2021 14 hours ago, Class316 said: I just have a generic USB sensor bar. Does that work just as good? I tried the WiiMote with the dolphin bar in MAME with slither with analog speed and sensitivity set to 2 and it almost worked well. What I found to be the problem is that it moves in a direction at a speed proportional to how far you are from its calibrated center of the screen and doesn't stop moving that direction until you move back past the cal center and then it starts to move the other way. It doesn't recognize absolute position, just absolute speed based on position. I assume this is because MAME still recognizes it as a gun, since the mouse cursor in the GUI screens in MAME still works perfectly as a mouse. No idea why. There are some wiimote to mouse programs for pc that don't use the sensor bar, but they are from 2010-2012 and I can't get them to work with the Wiimote in Windows 10. The were made for Vista or Win7 and I have XP on one laptop and Win10 on my other 2. Quote Link to comment Share on other sites More sharing options...
Swami Posted June 7, 2021 Author Share Posted June 7, 2021 On 6/5/2021 at 12:38 PM, Class316 said: I just have a generic USB sensor bar. Does that work just as good? Might try this next. Although, you apparently need a Wiimote made before 2011-2012 and may need to be a MotionPlus... https://steamcommunity.com/sharedfiles/filedetails/?id=809591460 Quote Link to comment Share on other sites More sharing options...
Class316 Posted June 10, 2021 Share Posted June 10, 2021 On 6/7/2021 at 12:26 AM, Swami said: Might try this next. Although, you apparently need a Wiimote made before 2011-2012 and may need to be a MotionPlus... https://steamcommunity.com/sharedfiles/filedetails/?id=809591460 Yes mine is an original Wii motion plus. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.