classicgamesnut Posted June 6, 2021 Share Posted June 6, 2021 So a few years back, I happened on a near-complete and boxed Heavy Sixer for $40 in a pawn shop. Needless to say, I jumped on it. Still has the Sunnyvale sticker on the bottom as well as a "FACTORY RECONDITIONED" sticker. Something I've not been able to find out, though, is what accessories and other items were routinely replaced as part of the factory reconditioning process. The paddles in the box are of the later variety, with the crossed tennis rackets. Didn't the original Heavy Sixer paddles have just an Atari logo on them? Also, there was indeed a gatefold boxed "Combat" cart in the package, with the red lower-case text only label, but it does NOT say "01" on the label, which also doesn't seem right. Were these items in question replaced by the original owner, or as part of the reconditioning procedure? Or are they correct for late-run Heavy Sixers? Quote Link to comment Share on other sites More sharing options...
nadir Posted June 6, 2021 Share Posted June 6, 2021 My heavy sixer was fairly late in the run and had the "01 Combat" bundled, but I can't say for sure that some didn't have non 01 versions... Quote Link to comment Share on other sites More sharing options...
BassGuitari Posted June 6, 2021 Share Posted June 6, 2021 17 hours ago, classicgamesnut said: The paddles in the box are of the later variety, with the crossed tennis rackets. Didn't the original Heavy Sixer paddles have just an Atari logo on them? All paddle controllers have the racquets on them; the earlier ones have an Atari emblem (or "Sears") printed next to them, while the regular ones say "paddle." There was actually quite a bit of cross-pollination with heavy sixer and light sixer components as Atari transitioned to the L6 and used up H6 parts, controllers, power supplies, boards, cases, 01 Combats, manuals, and so on. Systems (both heavy and light) with "incorrect" controllers, Combats, or paraphernalia--and even "frankensixer" systems, combining H6 and L6 boards and cases--were not that uncommon. Quote Link to comment Share on other sites More sharing options...
+sramirez2008 Posted June 6, 2021 Share Posted June 6, 2021 1 hour ago, BassGuitari said: There was actually quite a bit of cross-pollination with heavy sixer and light sixer components as Atari transitioned to the L6 and used up H6 parts, Yep. This is probably what led to the Sunnyvale light sixer that's a part of my collection. I don't know what a "Factory Reconditioned" H6er would have come with, but for my collection I've purchased sets of paddles, driving controllers, CX-10s and power adaptors to "complete" my consoles. I also have a gatefold "01" CIB Combat in addition to my lose copy pictured below. Quote Link to comment Share on other sites More sharing options...
classicgamesnut Posted June 13, 2021 Author Share Posted June 13, 2021 Thanks for the info. The serial # is 98208 J, which would put it pretty late in the run. With that in mind, maybe the accessories in the box are "correct" after all, even the non-01 labeled Combat in the gatefold box. For $40, I have no complaints at all. On the same subject, does anyone know what was actually done to returned warranty units during the reconditioning process...some type of standard overhaul, or an individual case-by-case troubleshooting and repair? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.