DarthCloud Posted June 6, 2021 Share Posted June 6, 2021 Hi Guys, I added support for the Atari Jaguar in my BlueRetro project. This allow to emulate a standard controller or even a TeamTap with 4 controller using common Bluetooth controllers. https://hackaday.io/project/170365-blueretro/log/193739-2021-06-06-atari-jaguar-support I also made an application using JagStudio and my GameDrive to test it. : https://github.com/darthcloud/AtariJaguarPadtest Base on Atari technical reference I also added support for the never released 6D controller, a 6 axes analog controller using a digital protocol (ie NOT using the 2 analog input). My application is build to always re-detect the controller every "frame", ideally a proper game would do this once a boot or at a leaser interval. I didn't dig too much into JagStudio and I think JagStudio own controller polling is still happening in conjunction to my own. Also framerate is not best. But that was good enough to allow me to test my adapter :). BlueRetro wiki got all the info you need to build your own, the use of level shift make it a bit wiring intensive however for a DIY build. https://github.com/darthcloud/BlueRetro/wiki 8 Quote Link to comment Share on other sites More sharing options...
SlidellMan Posted June 6, 2021 Share Posted June 6, 2021 Oooooh, I might have to tell my friends about your project. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.