Ikrananka Posted July 19, 2021 Share Posted July 19, 2021 On 7/14/2021 at 4:51 AM, Under4MHZ said: Another fix, I left in the too long delay I was using for testing. Once we're happy these are fixed, I'll release my other games with this fixed in them as well. Pegged-COL-1.04.zip 16.33 kB · 14 downloads Vexed-COL-1.04.zip 22.26 kB · 14 downloads Thank you for these updates and sorry for the long delay in testing them. I tried these with my NTT Data and Epyx 500XJ joysticks and the games respond perfectly. Not surprising really as the NTT Data is a great joypad and the Epyx 500XJ uses good quality microswitches. When testing with two of my standard ColecoVision joysticks on two different ColecoVision consoles I still occasionally see the cursor jump an extra space. This happens when I repeatedly move/release the joystick in one direction. If I hold the joystick in one direction the cursor steps through each space perfectly. So, the issue is almost gone but not quite. That said, these are the best versions of the games so far ? Quote Link to comment Share on other sites More sharing options...
Under4MHZ Posted July 21, 2021 Author Share Posted July 21, 2021 Thanks again for all your testing. I've increased the debouncing delay by a tick. Let me know if it's better. Pegged-COL-1.05.zip Vexed-COL-1.05.zip Quote Link to comment Share on other sites More sharing options...
Aking Posted August 8, 2021 Share Posted August 8, 2021 Will set up my CV and test on real hardware tomorrow Quote Link to comment Share on other sites More sharing options...
Aking Posted August 8, 2021 Share Posted August 8, 2021 On 7/20/2021 at 9:29 PM, Under4MHZ said: Thanks again for all your testing. I've increased the debouncing delay by a tick. Let me know if it's better. Pegged-COL-1.05.zip 16.71 kB · 27 downloads Vexed-COL-1.05.zip 22.29 kB · 27 downloads BOTH play great on real hardware , well tested looking forward for more of your games ! Quote Link to comment Share on other sites More sharing options...
Ikrananka Posted August 8, 2021 Share Posted August 8, 2021 Sorry @Under4MHZ completely forgot to test these, I'll get to them very soon. Thanks @Aking for testing them - did you use a standard CV controller? These seem to produce quite a lot of bounce and cause the most problem with the games. If I use a nice microswitched joystick then even the first versions of the games work fine. Quote Link to comment Share on other sites More sharing options...
Aking Posted August 8, 2021 Share Posted August 8, 2021 1 hour ago, Ikrananka said: Sorry @Under4MHZ completely forgot to test these, I'll get to them very soon. Thanks @Aking for testing them - did you use a standard CV controller? These seem to produce quite a lot of bounce and cause the most problem with the games. If I use a nice microswitched joystick then even the first versions of the games work fine. standard controller with top ball they work fine here Quote Link to comment Share on other sites More sharing options...
Ikrananka Posted August 8, 2021 Share Posted August 8, 2021 2 minutes ago, Aking said: standard controller with top ball they work fine here Great - thanks for confirming. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.